AiPi-DSL 3.5-inch screen test firmware use tutorial

AiPi-DSL (AiPi-DSL) is a screen drive development board designed by Ai-Thinker open-source team for

the Ai-M61-32S module. It supports 2.8/3.5-inch 30Pin SPI display screens, 2.4/1.28-inch 18 pin SPI

display screens.

This project is to realizes the interface and function of the weather station on the 3.5-inch display screen.

1. Burning firmware

1.1Serial port cable wiring

TTL TOOL

AiPi

3.3V

TXD

RXD

GND

1.2 Burning

Download burning tool：click to down

Firmware：click to down

After the burning tool begins burning, first keep press the "download button" and then press the "reset

button" and to release, then you can enter the burning mode.

The operation steps are performed as below:

Note：After the firmware is burned, you need to press the reset button for one time, then the program can

be run.

2. Use steps

AiPi-DSL 3.5-inch screen weather station Demo。

2.1 Instructions

The weather station Demo has two interfaces: the homepage and the configuration page. The homepage

mainly displays the time, weather and other information, and the configuration page is mainly used to

configure the WiFi connection.