R60AFD1-Fall detection module using guide
1
TEL:0755-88602663 sales@micradar.cn www.micradar.cn
501, West Block, Phase II, Tian 'an Innovation Technology Plaza, Futian District, Shenzhen
1. Product description
The fall detection radar makes algorithm judgment based on the
characteristics of personnel attitude parameters. It detects the falling
state of the target person through changes in speed, distance, attitude
and other motions, continuously records whether the target is in danger
of falling, and responds to the stationary residence alarm for long-term
abnormal stay. This product is installed on the top of the kitchen and
bathroom. The fall/still dwell function detection is not affected by
factors such as temperature, humidity, noise airflow, dust, light, and
complete stillness of the human body.
2. Appearance introduction
3. Main performance description
3.1. Main functions of radar
function points
State change time/function explanation
DP1: Someone/Nobody
No one to someone, report within 0.5s
From someone to no one, output no one status within
1 minute
DP2: Someone is stationary /
Someone is active
Static to dynamic switching, report within 0.5
seconds
Dynamic to static switch, report after 3 seconds
DP3: Motion amplitude
parameter 0 – 100
Output data once per second [Reference:
Description of Body Motion Amplitude Parameter
Output]
DP4: Fall Alarm
If it is judged that the conditions are met, report
a fall alarm
Antenna surface