www.angsemi.com Version 1.0
ANGSEMI Microelectronics Co., Ltd. All rights reserved. 15, Jan. 2022
ANGSEMI
Datasheet
Magnetic Sensor ICs
Omnipolar Detection High
Performance Hall-Effect Sensor IC
Ordering Information
Part Number
B
OP
(Gauss)
B
RP
Gauss)
Package
Type
Package Qty
Temperature
Eco Plan
AS1805ODSTRN
±35Gauss
±32Gauss
SOT23-3L
7-in reel 3000pcs/reel
-40～85℃
Green
AS1805ODMBN
±35Gauss
±32Gauss
SIP-3L
1000pcs/Package
-40～85℃
Green
AS1805ODSTRY
±35Gauss
±32Gauss
SOT23-3L
7-in reel 3000pcs/reel
-40～125℃
Green
AS1805ODMBY
±35Gauss
±32Gauss
SIP-3L
1000pcs/Package
-40～125℃
Green
General Description
Using CMOS process, the AS1805OD is designed
for high performance omnipolar detection hall-effect
application, such as cover switch, contactless switch,
solid state switch and lid close sensor etc battery
operation. The hall IC integrated an on-chip hall
voltage generator for magnetic sensing, a comparator
that amplifiers the hall voltage, a Chopper amplifier, a
Schmitt trigger to provide switching hysteresis for noise
rejection, and a complementary output.
AS1805OD is designed to respond to alternating
North and South poles. When the magnetic flux density
(B) is larger than operate point (B
OP
), the output will be
turned on (low), the output is held until the magnetic
flux density (B) is lower than release point (B
RP
), then
turn off (high).
The device is available in SOT23-3L & SIP-3L
Package and is rated over the -40°C to 125°C. The all
packages are RoHS and Green compliant.
Features
Input Voltage Range : 2.5V to 5.5V
Micro-power consumption ideal for battery
power applications
Omnipolar Operation, easy to use as output
Very high sensitivity hall sensor
CMOS process technology
Chopper stabilization amplifier stage
Magnetic Sensitivity (typical)
B
OP
=±35Gauss, B
RP
=±32Gauss
Good RF noise immunity
OD Output (need pull-up resistor)
Small Solution Size
RoHS & Green Compliant
SOT23-3L & SIP-3L Packages
-40℃ to +125 ℃ Temperature Range
Applications
Smart Meter
Cover switch
Contact-less switch
AS1805OD
www.angsemi.com Version 1.0
ANGSEMI Microelectronics Co., Ltd. All rights reserved. 15, Jan. 2022
AS1805OD
Marking & Pin Assignment
SOT23-3L
Pin Name
Pin No.
I/O
Pin Function
SOT23-3L
VDD
1
P
Input Power Supply
GND
3
P
Ground
OUTPUT
2
O
Output Pin
SIP-3L
Pin Name
Pin No.
I/O
Pin Function
SIP-3L
VCC
1
P
Input Power Supply
GND
2
P
Ground
OUTPUT
3
O
Output Pin.
Typical Application Circuit
Figure 1, Typical Application Circuit of AS1805OD