SS34A
SS34A
3.0AMPS. SCHOTTKY BARRIER RECTIFIERS
FEATURE
.For surface mounted application
.High current capability
.Low forward voltage drop
.Low power loss, high efficiency
.High surge current capability
.High temperature soldering guaranteed:
260℃/10 seconds at terminals.
MECHANICAL DATA
.Terminal: Solder plated
.Case: Molded with UL-94 Class V-0 recognized
Flame Retardant Epoxy
.Polarity: color band denotes cathode
.Packaging:12mm tape per EIA STD RS-481
.11 4(2 .9)
.10 2(2 .6)
.05 9(1 .50)
.05 1(1 .30)
.18 3(4 .65)
.17 5(4 .45)
.01 2(0 .305)
.00 6(0 .152)
.22 9(5 .80)
.21 3(5 .40)
.00 9(0 .23)
.00 2(0 .05)
.08 3(2 .10)
.07 4(1 .90)
.06 3(1 .60)
.04 0(1 .00)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25℃ ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz,resistive or inductive load. For capacitive load, derate current by 20%
Maximum Recurrent Peak Reverse Voltage
Maximum DC blocking Voltage
Maximum Average Forward Rectified Current
Peak Forward Surge Current 8.3ms single half
sine-wave superimposed on rated load
(JEDEC method)
Maximum Forward Voltage at 3.0A DC
Maximum DC ReverseCurrent @TJ =25°C
atratedDC blocking voltage @TJ =100°C
Typical Junction Capacitance (Note1)
Typical Thermal Resistance (Note2)
Operating Junction Temperature
Note:
1. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc
2. Measured on P.C.Board with 0.2×0.2”(5.0×5.0mm)Copper Pad Areas.