CAT. No. E1002C 2023
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
MULTILAYER CERAMIC CHIP CAPACITORS
◆
RATINGS
-55 to +125℃1. Category Temperature Range
25, 35, 50, 100, 250, 500Vdc2. Rated Voltage Range
0.010 to 47
µ
F3. Rated Capacitance Range
M (±20%), K (±10%) 4. Rated Capacitance Tolerance
5. Temperature Characteristics
6. Rated Ripple Current
X7R
See No.5 on the following table
◆
SPECIFICATIONS
No abnormality.
Withstand voltage
250% of rated voltage
130% of rated voltage
Shall be applied for 5 seconds.
More than 250V
Less than 500V
100V +
150% of rated voltage
Withstand Voltage1
3 Rated Capacitance Within specified tolerance.
4 Dissipation Factor
2 Insulation Resistance 100/C
R(MΩ) or 4000(MΩ)
whichever is less.
Rated voltage shall be applied for 60±5 seconds at
temperature 25±2℃.
Test ConditionSpecificationItemsNo.
5 Rated Ripple Current See STANDARD RATINGS
10kHz～1MHz (sine curve)
Ripple voltage Vp shall be less than
the rated voltage.
Temperature
Frequency
Voltage
1±0.1kHz
1±0.2Vrms
25±2℃
120±12Hz
0.5±0.2Vrms
C
R≦10µF CR>10µF
◆
FEATURES
1. Large capacitance by small size.
2. X7R and X7S temperature characteristics.
3. High permissible ripple current capability.
4. NTF: Temperature cycle : 1000 cycles.
◆
APPLICATIONS
1. Smoothing circuit of DC-DC converters.
2. On-board power supplies.
3. Voltage regulators for computers.
3. Noise suppressor for various kinds of equipments.
4. High reliability equipments.
◆
CONSTRUCTION
Ceramic Dielectric
Termination
(Tin Plating)
Internal Electrode
Temperature cycle : 1000 cycles(General product)
RoHS2
Compliant
NTS
Series
/
NTF
Series
As customer requirement, Chemi-Con has submits the test results according to AEC-Q200 for Multilayer ceramic
capacitors. Please contact us for more information.
Rated voltage
More than 500V
Less than 250V
X7R temperature characteristics
of 5.0％ or less
X7S temperature characteristics
of 7.5％ or less
13
CAT. No. E1002C 2023
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
MULTILAYER CERAMIC CHIP CAPACITORS
◆
SPECIFICATIONS
8 Solderability Min. 75% of surface of the termination
shall be covered with new solder
*Bending capability
NTS : 1mm
NTF : 1mm or 2mm
6
7
Adhesion
Bend strength of the face plating
No visible damage.
Appearance : No visible damage.
ΔC/C : ±15%
ΔC/C : ±15%
ΔC/C : ±15%
ΔC/C : ±15%
ΔC/C : ±15%
The substrate shall be bend at a rate of 1mm/s
for 5 seconds.
Substrate
5N (0.51kgf)
for 10±1 seconds
Capacitor
Bending capability*
Substrate
Press
Press bar
Capacitor
Support
45±2mm 45±2mm
10 Temperature Cycle Appearance : No visible damage.
D.F. : To meet the initial specification.
I.R. : To meet the initial specification.
9 Resistance to Soldering Heat Appearance : No visible damage.
D.F. : To meet the initial specification.
I.R. : To meet the initial specification.
11 Humidity Load Life
12 Endurance
Appearance : No abnormality.
I.R. : 25/C
R(MΩ) or 1000(MΩ)
I.R. : 50/C
R(MΩ) or 1000(MΩ)
whichever is less.
Appearance : No abnormality.
whichever is less.
Temperature : 40±2℃
Humidity : 90 to 95%RH
Voltage : Rated voltage
Time : 500±
24
hours
Temperature : 125±3℃
Voltage : Rated voltage
Time : 1000±
48
hours
For above temperature cycle.
NTS : For 5 cycles
NTF : For 1000 cycles
Step
1
2
Temperature (℃)
Min. Category temperature ±3
Max. Category temperature ±3
Room temperature
(min.)
30±3
30±3
3 max.
3
4 Room temperature 3 max.
0
0
Step
1
2
Temperature
100±10℃
200±10℃
Time
2min.
2min.
Solder
Solder Temperature
Dipping Time
Pb Free
245±5℃
2±0.5sec.
Preheating Condition :
Solder Temperature : 260±5℃
Dipping Time : 2±0.5 seconds
*CR : Rated Capacitance(µF)
Test ConditionSpecificationItemsNo.
NTS
Series
/
NTF
Series
Dissipation Factor
X7R temperature characteristics
D.F: 10% or less
X7S temperature characteristics
D.F: 15% or less
Dissipation Factor
X7R temperature characteristics
D.F: 10% or less
X7S temperature characteristics
D.F: 15% or less
14