TECHNICAL DATA SHEET
RRC2054-2S
DS_RRC2054-2S_A
Subject to technical changes without notice * Released document – Copy is not subject to revision service!
RRC2054-2S
Rechargeable Smart Battery Pack Li-Ion
14.40V / 6.80Ah / 97.9Wh
P/N: 110064
Features
Worldwide approvals and certification of safety standards
No development costs, fast time-to-market
Smart battery with numerous features according to the SMBus specification
Integrated LED State of Charge (SoC) indicator
State-of-the-art lithium-ion cells with the market’s highest energy density
High discharge performance
JEITA charging profile optimization
Numerous and redundant safety features, e.g.:
CUV (Cell Under Voltage): protection against deep discharge
COV (Cell Over Voltage): protection against over charge
OTC (Over Temperature in Charge): protection against overheating while charging
OTD (Over Temperature in Discharge): protection against overheating during discharging
Life-End-Control: protection against rapid cell ageing
Increased ESD protection up to 8kV
SHA-1 cryptosystem to prevent plagiarism
Life expectancy: Up to 80% of initial capacity after 800 cycles
Applications
Suitable for use with tablet PC’s, notebooks, industrial and medical devices, etc.
TECHNICAL DATA SHEET
RRC2054-2S
DS_RRC2054-2S_A
Subject to technical changes without notice * Released document – Copy is not subject to revision service!
Specification
General
Delivery status battery capacity
30%
Compliance information
IEC62133 / CE / UL2054 / FCC / PSE / KC / RCM /
BSMI / UKCA / CMIM / UN38.3 / RoHS / REACH
Operating temperature
0°C to 45°C (charge)
-20°C to 60°C (discharge)
Storage temperature
-20°C to 50°C max.
-20°C to 25°C recommended
Electrical Parameters
Nominal voltage
14.40V
Nominal capacity
6.80Ah
Initial impedance
<200mΩ @ 1kHz at 25°C
Max. charge current
3.40A
Max. charge voltage
16.80V
Max. discharge
8.50A
Battery Dimensions
Length
150.4mm +0.40/-0.40
Width
77.4mm +0.25/-0.25
Thickness
22.4mm +0.60/-0.40
Weight
440g
Contacts
+, D, C, T, -
Ingress protection
IP40
Safety Parameters PCM
Overcharge detection voltage / cell
4.23V
Overdischarge detection voltage / cell
2.50V
Overcharge detection current
4.00A
Overdischarge detection current
10.50A