Revision of May. 2023
Website: www.aemeee.com & www.aemchina.com & www.aemcomponents.com
Automove General Mullayer Ceramic Capacitors
AMT Series (Automove Grade Surface Mount MLCCs)
Shape and Dimensions:
Unit (Inch)
Length
(L)
Width
(W)
Terminaon Bandwidth ( T
b
)
0201 0.60±0.03 0.30±0.03 0.15±0.05
0402 1.00±0.10 0.50±0.10 0.25 +0.05/0.10
0603 1.60±0.15 0.80±0.15 0.40±0.15
0805 2.00±0.20 1.25±0.20 0.50±0.20
1206
3.20±0.20
3.30±0.30*
1.60±0.20
1.60 +0.3/-0.1
#
0.60±0.20
1210
3.20±0.30
3.30±0.40*
2.50±0.30 0.75±0.35
1808 4.50±0.40 2.00±0.25 0.75±0.35
1812 4.50±0.40 3.20±0.30 0.75±0.35
“*” for ≥ 1KV products. “#” for P thickness products.
Table 8 Thickness Code
Code Thickness, mm Code Thickness, mm Code Thickness, mm
A 0.60 ± 0.10 I 1.25 ± 0.20 Q 0.50+0.02/-0.05
B 0.8 + 0.15/-0.10 J 1.15 ± 0.15 R 3.10 ± 0.30
C 1.25 ± 0.10 K 0.50 ± 0.20 S 0.80 ± 0.07
D 1.40 ± 0.15 L 0.30 ± 0.03 T 0.85 ± 0.10
E 1.60 ± 0.20 M 0.95 ± 0.10 U 0.50 ± 0.10
F 2.00 ± 0.20 N 0.50 ± 0.05 V 0.20 ± 0.02
G 2.50 ± 0.30 O 3.50 ± 0.20 X 0.80 ± 0.10
H 2.80 ± 0.30 P 1.60 +0.3/-0.10 Z 0.25 ± 0.03
General Electrical Data:
Dielectric Material
C0G X7R
Chip Size
0201, 0402, 0603, 0805, 1206, 1210 0402, 0603, 0805, 1206, 1210
Rated voltage (WVDC)
10V, 16V, 25V, 50V, 100V, 200V, 250V, 500V, 630V, 1000V
Capacitance Range*
0.1pF ~ 47nF 100pF ~ 10μF
Tan δ
Capacitance Range Q Specicaon
Cap.<30pF Q≥400+20C
Cap.≥30pF Q≥1000
Refer to No.17 of 8. reliability test condions and requirements
Capacitance & Tan δ
Test Condion
Measured at the condion of 30~70% related humidity
For 25°C at ambient temperature
Precondioning for Class II MLCC: Perform a heat treatment at
150±10°C for 1 hour, then leave in ambient condion for 24±2
hours before measurement
Capacitance Range Test Condion
Cap.≤1000pF 1.0±0.2Vrms, 1.0MHz±10%
Cap.>1000pF 1.0±0.2Vrms, 1.0KHz±10%
1.0±0.2Vrms, 1.0KHz±10%, at 25°C ambient temperature
Operang temperature -55°C to +125°C
Capacitance Characterisc
±30ppm/°C ±15%
Insulaon Resistance at Ur
≥10GΩ or RxC≥500Ω-F, whichever is smaller Refer to No.17 of 8. reliability test condions and requirements
Terminaon
Cu/Ni/Sn (lead-free terminaon)
L
T
b
T
b
T
W