General Description
Using low power CMOS process, the AS1801AOD
is designed for low power, high performance omnipolar
detection hall-effect application, such as cover switch,
contact less switch, solid state switch and lid close
sensor etc battery operation. The hall IC integrated an
on-chip hall voltage generator for magnetic sensing, a
comparator that amplifiers the hall voltage, a Chopper
amplifier, a Schmitt trigger to provide switching
hysteresis for noise rejection, and a complementary
output.
The total power consumption of AS1801AOD is
typically less than 3uA at 2.8V power supply.
AS1801AOD is designed to respond to alternating
North and South poles. When the magnetic flux density
(B) is larger than operate point (B
OP
), the output will be
turned on (low), the output is held until the magnetic
flux density (B) is lower than release point (B
RP
), then
turn off (high).
The device is available in SOT23-3L&SIP-3L
Package is rated over the -40°C to 85°C.
Features
Input Voltage Range: 2.4V to 5.5V
Micro-power consumption ideal for battery
power applications
Omnipolar Operation, easy to use as output
Sensitivity hall sensor
Low Power CMOS process technology
Chopper stabilization amplifier stage
Magnetic Sensitivity (typical)
B
OP
=±18Gauss, B
RP
=±10Gauss
Good RF noise immunity
RoHS & Green Compliant
SOT23-3L & SIP-3L Packages
-40℃ to +85 ℃ Temperature Range
Applications
Smart Meter
Cover switch
Contact-less switch