BAT32A237 User's Guide |Documentation Usage Instructions
www.mcu.com.cn 2 / 1037 V1.0.1
Documentation Instructions
This manual is the technical reference manual for the BAT32A237 microcontroller product. The technical
reference manual is the application instruction material on how to use this series of products, including the
structure, function description, working mode and register configuration of each functional module.
The technical reference manual is a description of all functional modules of this series of products. If you want
to know the feature description of the product (that is, the functional configuration), you can refer to the respective
data sheet.
The data sheet information is as follows:
BAT32A237xx:BAT32A237_datasheet_vx.x. pdf
Usually in the early stage of chip selection, you shall first check the data sheet to evaluate whether the product
can meet the functional requirements of the design; after basically selecting the required product, you need to check
the technical reference manual to determine whether the working mode of each functional module does meet the
requirement;When determining the selection and entering the programming design stage, you need to read the
technical reference manual in detail to understand the specific implementation and register configuration of each
function. Refer to the data sheet for information on voltages, currents, drive capabilities, and pin assignments when
designing hardware。
For a detailed description of the Cortex-M0+ core, SysTick timer and NVIC, please refer to the respective ARM
documents.