9418
60W Wireless Power Receiver with WattShare™ TRx Mode
The P9418 is a highly-integrated single-chip
wireless power transmitter/receiver IC (TRx). The
device configures to transmit or receive an AC
power signal through magnetic induction.
As a wireless power transmitter, the P9418 features
an on-chip full/half-bridge inverter, a pulse-width
modulation (PWM) generator, a
modulator/demodulator for communication, and a
microcontroller to produce an AC power signal to
drive an ex ter n al L-C tank. As a receiver, the device
receives an AC power signal from a wireless
transmitter and converts it to a rectified output
voltage, which can power devices or supply the
charger input in mobile applications. For optimized
power delivery, the P9418 integrates a high-
efficiency Synchronous Full Bridge Rectifier and
control circuitry that modulates the load to send
message packets to the Transmitter (Tx).
The P9418 features multiple-time programmable
(MTP) non-volatile memory to easily update control
firmware and device functions.
Also, the de vice includes over-temperature and
voltage protection. Fault conditions associated with
power transfer are managed by an industry-leading
32-bit ARM
®
Cortex
®
-M0 processor that offers a
high level of programmability while consuming
extremely low standby power. The processor also
controls GPIOs to indicate operating and fault
modes.
The P9418 is avai lab le in an ultr a-small 70-WLCSP
package.
Applications
• Wireless power solution for mobile applications
Features
• Single-chip WPC medium power wireless solution
• 24kB Multiple-time programmable (MTP)
non-volatile memory for expanded feature support
• WPC 1.2.4 compliant and WPC 1.3+ compatible
• Delivers up to 60W as a receiver
• WattShare™ TRx mode with up to 10W Tx
capability
• Embedded 32-bit ARM
®
Cortex
®
-M0 processor
• Reliable overvoltage clamping
• Proprietary Rx-to-Tx modulation/demodulation for
two-way communication
• High-performance LDO
• Tx-to-Rx (backchannel) communication
• Supports proprietary mode magnetic induction
wireless power solutions
• Supports I
2
C 400kHz standard interface and
GPIOs
• Package: 7 × 10-ba ll arr a y, 2.82 × 4.22 ×
0.50 mm, 70-WLCSP with 0.40mm ball pitch
Typical Application Diagram
AC
1
AC
2
BST2
CMB
COM2
COM1
CMA
BST1
PGND
VRECT
VOUT
GP0,GP2-GP4
OD0-OD4
Chip Enable
P9418
nEN
Rx-OUTPUT
Tx-INPUT
LDO5P0
TRx
Coil
VSNS
LDO1P8
DEMOD
VSNS
DEMOD
PCLAMP
C
S
C
D
R
CLAMP
C
RECT
C
LDO1P8
C
LDO5P0
C
VOUT