Specifications (characteristics)
Storage as single product.
T_use = -40 ºC to +105 °C
T_use = -40 ºC to +105 °C
Output voltage
(DC characteristics)
Default (f
O
> 40 MHz),
Fast
*A: 1.62 V to 1.98 V, *B: 1.98 V to 2.20 V,
*C: 2.20 V to 2.80 V, *D: 2.70 V to 3.63 V
20 % - 80 % V
CC,
L_CMOS = 15 pF
Output disable time (OE)
Output disable time (ST)
Measured from the time OE or ST¯¯ pin crosses 30 %
V
CC
Measured from the time OE pin crosses 70 % V
CC
Measured from the time ST¯¯ pin crosses 70 % V
CC
Measured from the time V
CC
reaches its rated
minimum value, 1.62 V
This is included in frequency tolerance specification.
*1 Frequency tolerance includes initial frequency tolerance, frequency / temperature characteristics, frequency / voltage coefficient, frequency / load coefficient and
frequency aging (+25 °C, 1 year).
High
*2
: Specified frequency output from OUT pin
Low: Out pin is low (weak pull down), only output driver is disabled.
High
*2
: Specified frequency output from OUT pin
Low: Out pin is low (weak pull down),
Device goes to standby mode. Supply current reduces to the least as I_std.
*2 Please do not use the OE/S T terminal in the open state.
CRYSTAL OSCILLATOR (Programmable)
OUTPUT: CMOS
SG-8101 series
• Frequency range : 0.67 MHz to 170 MHz (1 × 10
-6
Step)
��� Supply voltage : 1.62 V to 3.63 V
• Function : Output enable (OE) or Standby (ST¯¯)
• Frequency tolerance : ±15 × 10
-6
(-40 ºC to +85 ºC)
±20 × 10
-6
, ±50 × 10
-6
(-40 ºC to +105 ºC)
• PLL technology to enable short lead time
• Available field oscillator programmer “SG-Writer II”
Product Number
SG-8101CG: X1G005181xxxx00
SG-8101CE: X1G005211xxxx00
SG-8101CB: X1G005201xxxx00
SG-8101CA: X1G005191xxxx00
2.5 × 2.0 mm 3.2 × 2.5 mm 5.0 × 3.2 mm 7.0 × 5.0 mm