Specifications subject to change without notice.
www.taitien.com
sales@taitien.com.tw
Parameter Min. Typ. Max. Unit Test Condition
Pulling Range ±25 ppm
Control Voltage 0 +3.3 V
Slope Positive
Center Voltage +1.65 V
Linearity -10 +10 %
Modulation Bandwidth
1 KHz
VC Input Impedance
100 Mohm
Parameter
Min. Typ. Max. Unit Test Condition
Voltage +3.135 +3.3 +3.465 V
30 mA At maximum supply voltage
Parameter Reference Std. Test Condition
Vibration Test
DIN EN 60068-2-6
10~55Hz, 0.75mm Peak; 55~2000Hz, 10g Peak.
10 Cycles; 3 axis; 1Oct./min.
Thermal Shock
DIN EN 60068-2-14
30 min. @each temperature 10 cycles,
Transfer<1min.; -40 +/-3 ; 85 +/-3
Mechanical Shock
DIN EN 60068-2-27 6 shocks per axis, 100g; 6ms both directions
o
C
o
C
o
C
o
C
-20
o
C ~ +70
o
C VLEUWC TNF-Frequency J
-40
o
C ~ +85
o
C VLEUWL TNF-Frequency J
ELECTRICAL FREQUENCY ADJUSTMENT (PIN = “VCO INPUT”)
INPUT POWER (PIN = “+VDC”)
ENVIRONMENTAL
ORDERING INFORMATION
PHASE NOISE TEST DATA
Note: not all combination of options are available. Other specifications may be available upon request.
-180
-170
-160
-150
-140
-130
-120
-110
-100
-90
-80
10 100 1,000 10,000 100,000 1,000,000 10,000,000
L (f) [dBc/Hz]
Offset frequency [Hz]
VLEU-Type 100MHz CMOS VCXO Phase Noise
84