- 88 -
All Data Subject To Change Without Notice
www.andersonpower.com
Top View
Side View
[ 25.4 ]
1.00
[ 39.7 ]
1.56
[ 79.4 ]
3.13
[ 28.6 ]
1.13
Housing marking
specifying 1328G1 contact ONLY
SB® 175 ORDERING INFORMATION
SB
®
175 Connectors
Up to 280 Amps
SB
®
175 Standard Housings
The second to largest SB
®
housings work with wire contacts up to 1/0
AWG (50 mm²) as well as busbar contacts. Genderless design mates with
itself. Mechanical keys are color-coded. NOTE: SB
®
175 black housing is
keyless and can be mated with all other colors.
Description Part Numbers
Minimum Quantity 200 50
Yellow 943-BK 943
Orange 942-BK 942
Red 949-BK 949
Gray 940-BK 940
Blue 941-BK 941
Black (Keyless) 2-7252G11 -
SB
®
175 Chemical Resistant Housings
Same features as the Standard SB
®
175 but molded in a
chemical resistant PBT/ PC blend. Suitable for use to -40°C.
Description Part Numbers
Minimum Quantity 200 50
Red P949-BK P949
Gray P940-BK P940
SB
®
175 2/0 Housing
Genderless design mates with itself. Can be cross mated with gray SB
®
175 housing, but amperage capability is limited to the SB
®
175 rating with
the wire and contact used.
Voltage
Description Color-Code Part Number
Minimum Quantity 100
Gray 36V 115107G1
Wires sizes from 10 to 1/0 AWG (5.3 to 50 mm²) t in
the second to largest connector in the SB
®
series. The
3 pole SB
®
175 adds an addional posion for power
or grounding. All Mulpole wire connector housings
are genderless and mate to themselves minimizing
inventory and assembly complexity.
• Silver Plated Wire Contacts up to 1/0 (50 mm²)
Allows UL rated currents up to 280 amps
• Chemical Resistant Housing Option
Extends temperature range down to -40°C, while oering
enhanced UV and chemical resistance
• UL Rated for Hot Plugging up to 100 Amps
Great for battery or other applications where the ability to
interrupt circuits is required
Mated Length
Bottom View
[ 133.4 ]
5.25
Material ID
P = Chemical
Resistant
[ 55.6]
2.19
[ 25.4 ]
1.00
[ 79.6 ]
3.13
[ 6.5 ]
Ø 0.26
(2) PLC’S
[ 28.6 ]
1.13
[ 11.3 ]
0.45
SB® 175
2 Pole
3 Pole
- 89 -
All Data Subject To Change Without Notice
www.andersonpower.com
SB
®
175 3 Pole Housings & Hardware
A three pole version of the standard SB
®
175 housing has
a two piece housing with springs and hardware. Useful for
DC 2 wire plus ground and AC single phase applications.
Description Part Numbers
Minimum Quantity 100 25
Gray Housing and Hardware Kit - 902
Gray Housing Top Half 2-5048 -
Gray Housing Bottom Half 2-5049 -
Hardware Kit - 110G34
SB
®
175 Silver Plated Wire Contacts
Silver plated contacts o󰀨er superior electrical performance and durability up to 10,000 mating cycles.
See reducing bushings in accessory section for smaller wires.
Dimensions
Mating Loose Piece - A - - B - - C - - D -
AWG mm² Force Part Numbers inches mm inches mm inches mm inches mm
Minimum Quantity 500 50
1/0 53.5 High 1382-BK 1382 2.35 59.69 0.52 13.21 0.44 11.18 1.04 26.42
1 42.4 High 1347-BK 1347 2.35 59.69 0.52 13.21 0.39 9.91 1.04 26.42
2 33.6 High 1383-BK 1383 2.35 59.69 0.52 13.21 0.35 8.89 1.04 26.42
4 21.1 High 1384-BK 1384 2.35 59.69 0.52 13.21 0.30 7.62 1.04 26.42
6 13.3 High 1348-BK 1348 2.10 53.34 0.37 9.40 0.22 5.59 0.80 26.42
2/0 * 70 Low 1328G1-BK 1328G1 2.35 59.69 0.64 16.26 0.49 12.45 1.04 26.42
* Use with 115107G1 only
SB
®
175 Silver Plated Busbar Contacts
Provides a quick disconnect input or output busbar connection.
Busbar contacts are for mating with wire contacts only. Part number
180BBS includes lock nuts. Locknuts must be ordered separately
for 180BBS-BK.
Mating
Type Thread Force Loose Piece Part Numbers
Minimum Quantity 1,000 120 10
Busbar 1/4-20 High - 180BBS-BK 180BBS
Lock Nut 1/4-20 - H1216P7 110G56 110G55
Silver Plated Wire Contacts - use with 2/0 Housing ONLY
Silver plated contacts o󰀨er superior electrical performance and durability up to 5,000 mating cycles.
Dimensions
- A - - B - - C - - D -
Type AWG mm² Loose Piece Part Numbers inches mm inches mm inches mm inches mm
Minimum Quantity 300 50
Individual 2/0 70 1328G1-BK 1328G1 2.35 59.69 0.64 16.26 0.49 12.45 1.04 26.42
[ 79.4 ]
3.13
[28.6]
1.13
[ 11.7 ]
0.46
[ 6.7 ]
Ø 0.27 (4)
[ 28.6 ]
1.13
[ 82.6 ]
3.25
[ 26.2 ]
1.03
[ 25.4 ]
1.00
Top View
Side View
See Busbar contact drawing on
website for further detail.
B
[ 109.0 ]
4.29
[ 25.4 ]
1.0
[ 12.7 ]
0.5
[ 4.57 ]
0.18
#¼- 20 THD
[ 12.7 ]
0.50
B
C
A
D
[ 12.7 ]
0.50
B
A
D
C
SB® 175