TVS Diodes Datasheet
© 2023 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: F.W01/11/23
TP5.0SMDJ Series
Surface Mount - 5000W
TVS Components are ideal for the protection of I/O Interfaces, V
CC
bus and other vulnerable circuits used in Telecom, Computer,
Industrial and Consumer electronic applications.
■ High reliability application and
automotive grade AEC-Q101
qualified
■ 5000W peak pulse power
capability at 10/1000μs
waveform, repetition rate (duty
cycles):0.01%
■ SMD low profile surface
mount package minimizing
PCB footprint
■ Typical failure mode is short
from over-specified voltage or
current
■ Whisker test is conducted
based on JEDEC JESD201A
per its table 4a and 4c
■ ESD protection of data lines in
accordance with IEC 61000-4-
2, 30kV(Air), 30kV (Contact)
■ EFT protection of data lines in
accordance with IEC 61000-
4-4
■ Built-in strain relief
■ Glass passivated chip junction
■ Fast response time: typically
less than 1.0ps from 0V to V
BR
min
■ Excellent clamping capability
■ Low incremental surge
resistance
■ High temperature reflow
soldering guaranteed:
260°C/40sec
■ V
BR
@ T
J
= V
BR
@25°C
x (1+αT x (T
J
- 25))
(αT:Temperature
Coefficient)
■ UL Recognized compound
meeting flammability rating V-0
■ Meet MSL level1, per
J-STD-020, LF maximum peak
of 260°C
■ Matte tin lead–free plated
■ Halogen free and RoHS
compliant
■ Pb-free E3 means 2nd level
interconnect is Pb-free and
the terminal finish material is
tin(Sn) (IPC/ JEDEC J-STD-
609A.01)
■ Recognized to UL 497B as an
Isolated Loop Circuit Protector
Parameter Symbol Value Unit
Peak Pulse Power Dissipation at T
L
=25
O
C by
10/1000μs Waveform (Fig.2)(Note 1), (Note 2)
P
PPM
5000 W
Power Dissipation on Infinite Heat Sink at
T
L
=50
O
C
P
M(AV)
6.5 W
Peak Forward Surge Current, 8.3ms Single Half
Sine Wave (Note 3)
I
FSM
300 A
Maximum Instantaneous Forward Voltage at
100A for Unidirectional Only
V
F
5.0 V
Operating Temperature Range T
J
-65 to 150 °C
Storage Temperature Range T
STG
-65 to 175 °C
Typical Thermal Resistance Junction to Lead
R
ƟJL
15 °C/W
Typical Thermal Resistance Junction to Ambient
R
ƟJA
75 °C/W
Uni-directional
Bi-directional
Bi-directional
Uni-directional
Cathode
Anode
Notes:
1. Non-repetitive current pulse per Fig. 4 and derated above T
A
= 25
O
C per Fig. 3.
2. Mounted on copper pad area of 0.31x0.31” (8.0 x 8.0mm) to each terminal.
3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional device only, duty
cycle=4 per minute maximum.
Description
Features
Applications
Functional Diagram
Maximum Ratings & Thermal Characteristics
(T
A
=25°C unless otherwise noted)
RoHS
The TP5.0SMDJ series is designed specifically to protect
sensitive electronic equipment from voltage transients
induced by lightning and other transient voltage events.