Movingcomm Technology
1. Introduction
The IoT22 is a wireless surveillance core board based on a ZXW 4G cellular and WIFI communication technology platform.
It supports a wide range of wireless communication components such as FDD-LTE, TDD-LTE and WLAN and is designed for
plug and play wireless surveillance applications. In addition, IoT22 can also be widely used in a variety of Internet of Things
(IoT) front end data capture and collection. It can also be used in a medium and high speed data transmission unit (DTU).
It has standardized interfaces that can do direct docking and rapid alignment to a control board to achieve application
solutions. The IoT22 provides main interfaces such as power interface, USB interface, SIM card holder interface, Soft reset
button, UART interface, Sleep Wake Up interface, RF interface, and 10M/100M network interface.
2. Product Key Features
Plug and play auto dial-up Internet access
Plug and play Standard Ethernet Port
Wide Voltage Input
High Reliability, Low Cost, Low Power Consumption
Standard 38mm x 38mm positioning holes for easy assembly
3. Device Interfaces
Input: 4.2V-16V, Typical: 12V, Output Follow Input Voltage
1.8V/3.0V Nano USIM/SIM Card Slot
4PIN Socket x 1, 10/100 Auto Adaptive, LAN/WAN
Configurable
Press and hold 3sec above to reset to factory default setting
4G MAIN Antenna Interface x 1
4G Auxiliary Antenna Interface x 1
WIFI Antenna Interface x 1
Power On / WIFI Status x 1, Cellular Connection Status x 1