Introduction
This manual is a guide for using the Mitsubishi Electric CNC M800/M80/E80 Series.
Supported models are as follows:
Abbreviations in this manual are as follows:
This manual describes operations, production processes and maintenances for users who operate the Mitsubishi Electric
CNC installed machine tool. Read this manual thoroughly before using CNC unit. Moreover study the "Precautions for Safety"
on the next page before use to use the unit safely. Be sure to keep this manual always at hand.
CAUTION
For items described as "Restrictions" or "Usable State" in this manual, the instruction manual issued by the
machine tool builder (MTB) takes precedence over this manual.
Items not described in this manual must be interpreted as "not possible".
This manual is written on the assumption that all the applicable functions are included. Some of them, however,
may not be available for your NC system. Refer to the specifications issued by the machine tool builder before
use.
Refer to the Instruction Manual issued by each MTB for details on each machine tool.
Some screens and functions may differ depending on the NC system (or its version), and some functions may
not be possible. Please confirm the specifications before use.
To protect the availability, integrity and confidentiality of the NC system against cyber-attacks including unau-
thorized access, denial-of-service (Dos) (*1) attack, and computer virus from external sources via a network,
take security measures such as firewall, VPN, and anti-virus software.
(*1) Denial-of-service (Dos) refers to a type of cyber-attack that disrupts services by overloading the system or
by exploiting a vulnerability of the system.
Mitsubishi Electric assumes no responsibility for any problems caused to the NC system by any type of cyber-
attacks including DoS attack, unauthorized access and computer virus.
In this manual, the following abbreviations might be used.
L system: Lathe system
M system: Machining center system
MTB: Machine tool builder
Also refer to the manuals on "Manual List" as necessary.
Supported models Details
M800W Series M850W, M830W
M800S Series M850S, M830S
M80W Series M80W
M80 Series M80 TypeA, M80 TypeB
E80 Series E80 TypeA, E80 TypeB
Abbreviations Supported models
M800, M800 Series M800W Series/M800S Series
M80, M80 Series M80 Series/M80W Series
M800/M80, M800/M80 Series M800W Series/M800S Series/M80W Series/M80 Series
M8, M8 Series M800W Series/ M800S Series/M80W Series/M80 Series/E80 Series