Lenze i500 conveyor solutions

i500 drives are available in IP20, NEMA 1, as

well as NEMA 4X versions, ready to mount

where you need them. NEMA 4X models also

feature an optional, lockable disconnect switch

to service the motor right at the conveyor.

The NEMA 4X models can also be equipped

with optional 22 mm operators which can

be used for functions such as START/STOP

and potentiometers for speed control for

ease of operation by gloved workers.

i500 drives are compatible with both induction and

PMAC motors, and have been employed successfully in

Motorized Drum Roller (MDR) applications, keeping pace

with design trends in the intralogistics industry.

i500 inverters can also be equipped with

optional WLAN communication modules

for ease of diagnostics or programming

when mounted in hard-to-reach locations.

No challenge is too great nor single application too small. From industrial plants to OEMs to intralogistics centers,

Lenze i500 conveyor solutions are hard at work. Versatile and robust, our industrial drives are cost effective and low

maintenance. Whatever your speciﬁc application requires, Lenze has the drive to match form, ﬁt and function.

• CANopen

• EtherCAT

• EtherNet/IP

• IO-Link

• Modbus

• PROFIBUS

• PROFINET

• Modbus TCP/IP

• POWERLINK

Input Voltage/Power:

• 120 V • 230 V • 400/480 V • 600 V

• 0.33 hp (0.25 kW) to 150 hp (110 kW)

Features:

• Programmability

• Sequencer mode

• Parameters grouped by

function

• Hassle-free installation

• Quick commissioning

• Diagnostics

• Quick reset to default or

OEM settings

With a wide range of communication options, i500 is also

ready to integrate into your choice of upper level controls

vendor:

i500 — Conveyor Ready!

Conveyors are used in a wide range of commercial, industrial,

and intralogistics applications. Conveyor motors are sized for

the maximum torque starting condition; however, once a

system is running at speed the required torque, and thereby

the energy requirements, drops signiﬁcantly.

To get the best sizing possible, the i500 drives series are all

capable of 200% peak load for 3 seconds, and 150% for 1

minute. To achieve maximum energy savings, i500 drives

can use their “V/Hz eco” function to dynamically adjust their

V/Hz proﬁle to reduce the voltage supplied to the motor as a

function of dropping motor current.

Adjustable S ramp acceleration/deceleration allows jerk to be

reduced and results in gentler material handling. Switch-off

positioning can be employed for repeatable stopping

orientation of the application.

Lenze i500 conveyor solutions

Conveyors

The i550 also features an optional Safe Torque Off (STO)

input module rated for SIL3 level e performance-ready to

integrate into your plant’s stringent safety control systems.

Technical Details

DetailsV/Hz Eco mode for maximum energy savings:

In the Lenze i500, set the “Motor control mode” (P300.000) = “V/f

control (open loop) [6]” and also set “V/f characteristic shape”

(P302.000) = “Eco [3]” to take full advantage of the energy savings

for induction motors in conveyor applications.