08.2019

TA!

2EN

Cleaning Drilling

Disassembly

Align shafts

(axial, radial and angular)

Warning!

Always work with gloves to

protect yourself from burns

from hot coupling parts!

Even warming of the shaft

hub at 80 °C to 120 °C is

harmless in order to simplify

assembly.

Recycling/disposal

Used grease must be disposed

of appropriately.

Grease gun Clamping site

Legend

Assembly

Valid data on the required

tightening torques on the

relevant screw connections

can be found in the following

tables. The tightening torque is

to be applied by tightening

the hexagon nut.

Assembly, Disassembly

Safety instructions

Rotating machine parts may injure operators and service staff!

Therefore:

Switch off the drive before assembly work.

Safeguard the machine against accidental switch-on.

Mount all covers and protection devices before switching on

the machine.

RINGFEDER

products may only be mounted by specialist staff

and for suitable applications.

Attention

Please read these instructions through carefully.

In the event of infringement of these notes all claims of

liability will become void.

RINGFEDER POWER TRANSMISSION reserves the right

to technical changes to improve the product.

RINGFEDER

Gear Couplings are accepted state of

the art.

If you experience problems or have any questions, our

technical and service staff will be happy to assist you. See

the reverse of these instructions for the corresponding

contact information.

Gear Couplings

RINGFEDER

TNZ