Arlington Industries, Inc.
INSTALL ACCORDING TO
www.aifittings.com 800-233-4717
Arlington Industries, Inc.
c us
www.aifittings.com 800-233-4717
APPLICABLE LOCAL
ELECTRICAL CODE
c us
INSTALL ACCORDING TO
APPLICABLE LOCAL
ELECTRICAL CODE
#8 x 1/2" Screw
(not included)
Slider Clip
Wire devices according to all local, state, & national codes.
SLB102 2-Gang Box w/ (2)NM94 Fittings
Installation Instructions
Contents
anywhere along the length of the bar that has pilot holes.
2. Attach SLB102 Box to the Slider Clip using the (2) included #8 x ¾” long screws. SLB102 Box can also be
180° if needed for an inside mount installation. Attach Bar Hanger to studs* with screws or nails (not provided)
1. Bend flanges at 2-1/2” mark when using ½” or 5/8” thick wallboard. Flanges can be bent 90° or bent back
Adjustable Bar Hanger w/ Two-Gang Box (15"-24" Stud Spacing)
Pull NM cable and install using included NM94 connector.4.
Wire devices according to all local, state, & national codes.5.
mounted directly to the SL18/SL24 Bar Hanger using (2) #6 or #8 x ½” long sheet metal screws (not
provided). Install screws from the inside of the SLB102 Box into the pilot holes of the SliderBar. Holes are
formed in the back of the SLB102 Box. Remove knockouts to access direct mount hole pattern.
this product to your local store or distributor.
If you have any questions or if parts are missing , Please call our Customer Service Dept. at 1-800-233-4717. Do not call or return
Adjustable Bar Hanger (SL18 or SL24)
3.
Contents
SLB102 2-Gang Box w/ (2) NM94 Fittings
Adjustable Bar Hanger (SL18 or SL24)
:
Installation Instructions
*SL2B24 is not for use with metal studs in Canada
5.
Direct Mount Shown
Slider Clip Mount Shown
anywhere along the length of the bar that has pilot holes.
(2) #8 x 3/4" Long Screws
this product to your local store or distributor.
Direct Mount Shown
Pull NM cable and install using included NM94 connector.4.
If you have any questions or if parts are missing , Please call our Customer Service Dept. at 1-800-233-4717. Do not call or return
Position the SLB102 Box at the desired location and tighten the screws to secure the box. Box can be installed
Slider Clip
*SL2B24 is not for use with metal studs in Canada
:
(2) #8 x 3/4" Long Screws
Bend flanges at 2-1/2” mark when using ½” or 5/8” thick wallboard. Flanges can be bent 90° or bent back 1.
180° if needed for an inside mount installation. Attach Bar Hanger to studs* with screws or nails (not provided)
Attach SLB102 Box to the Slider Clip using the (2) included #8 x ¾” long screws. SLB102 Box can also be 2.
mounted directly to the SL18/SL24 Bar Hanger using (2) #6 or #8 x ½” long sheet metal screws (not
provided). Install screws from the inside of the SLB102 Box into the pilot holes of the SliderBar. Holes are
formed in the back of the SLB102 Box. Remove knockouts to access direct mount hole pattern.
Position the SLB102 Box at the desired location and tighten the screws to secure the box. Box can be installed 3.
SL2B18 Adjustable Bar Hanger w/ Two-Gang Box (12"-18" Stud Spacing)
Add 'GC' suffix for Canada (Ground Clip)
SL2B24
Slider Clip Mount Shown
SL2B18 Adjustable Bar Hanger w/ Two-Gang Box (12"-18" Stud Spacing)
Add 'GC' suffix for Canada (Ground Clip)
SL2B24 Adjustable Bar Hanger w/ Two-Gang Box (15"-24" Stud Spacing)
#8 x 1/2" Screw
(not included)
Flange Bent 90°
Ready to install
Pilot Holes
#8 x 3/4" Screw
Slider Clip
Ready to install
Flange Bent 90°
Pilot Holes
#8 x 3/4" Screw
Slider Clip