Features
· Glass Passivated Die Construction
· Low leakage
· Ideal for printed circuit board
· Surge overload rating-30A peak
· Designed for Surface Mount Application
· Plastic Material-UL Flammability 94V-O
Mechanical Data
· Case:Reliable low cost construction
utilizing molded plastic technique
· Terminals:Plated Leads Solderable per
MIL-STD-202,Method208
· Polarity:As Marked on Case
· Mounting Position:Any
· Marking:Type Number
Maximum Ratings and Electrical Characteristics @TA=25℃ unless otherwise specified
Single Phase,half wave,60Hz,resistive or inductive load.For capacitive load,derate current by 20%.
Parameter Symbol DB101S DB102S DB103S DB104S DB105S DB106S DB107S UNIT
Maximum repetitive peak reverse voltage
V
RRM
50 100 200 400 600 800 1000 V
Maximum RMS voltage V
RMS
35 70 140 280 420 560 700 V
Maximum DC blocking voltage
V
DC
50 100 200 400 600 800 1000 V
Maximum Average forward output rectified
current @TA=40℃
I(AV) 1
Peak forward surge current 8.3ms single
sine-wave superimposed on rated load(JEDEC
Method)
IF
SM
35 A
Maximum instantaneous forward voltage drop
per diode @1.0A
VF 1.1 V
Maximum DC reverse current at TA=25℃
rated DC blocking voltage per leg TA=125℃
IR
5.0
500
uA
Typical thermal resistance per leg (Note1)
RθJA 40
℃/W
RθJL 15
Operating junction temperature range TJ -55 to +150 ℃
storage temperature range Tstg -55 to +150 ℃
Note:
1.Mounted on glass epoxy PC board with 1.3mm² solder pad.
2.Mounted on aluminum substrate PC board with 1.3mm² solder pad.
3.Measured at 1.0MHz and applied reverse of 4.0V D.C.
A
DB101S
-
DB107S
SURFACE MOUNT BRIDGE RECTIFIERS
· Glass Passivated Die Construction
· Low leakage
· Ideal for printed circuit board
· Surge overload rating-30A peak
· Designed for Surface Mount Application
· Plastic Material-UL Flammability 94V-O
· Case:Reliable low cost construction
utilizing molded plastic technique
· Terminals:Plated Leads Solderable per
MIL-STD-202,Method208
· Polarity:As Marked on Case
· Mounting Position:Any
· Marking:Type Number
Single Phase,half wave,60Hz,resistive or inductive load.For capacitive load,derate current by 20%.
Parameter Symbol DB101S DB102S DB103S DB104S DB105S DB106S DB107S UNIT
Maximum repetitive peak reverse voltage
V
RRM
50 100 200 400 600 800 1000 V
Maximum RMS voltage V
RMS
35 70 140 280 420 560 700 V
Maximum DC blocking voltage
V
DC
50 100 200 400 600 800 1000 V
Maximum Average forward output rectified
current @TA=40℃
I(AV) 1
Peak forward surge current 8.3ms single
sine-wave superimposed on rated load(JEDEC
Method)
IF
SM
A
Maximum instantaneous forward voltage drop
per diode @1.0A
VF 1.1 V
Maximum DC reverse current at TA=25℃
rated DC blocking voltage per leg TA=125℃
IR
5.0
500
uA
Typical thermal resistance per leg (Note1)
RθJA 40
℃/W
RθJL 15
Operating junction temperature range TJ -55 to +150 ℃
storage temperature range Tstg -55 to +150 ℃
Note:
1.Mounted on glass epoxy PC board with 1.3mm² solder pad.
2.Mounted on aluminum substrate PC board with 1.3mm² solder pad.
3.Measured at 1.0MHz and applied reverse of 4.0V D.C.
A
@TA=25℃ unless otherwise specified
·
UL Recognized File E476623UL Recognized File E476623
·
35
http://www.trr-jx.com
version: 03
0.091 2.30
0.313
0.329
7.95
8.35
0.402(10.2)
0.378
9.6
0.0098 0.25
0.15
0.311
0.291
7.9
7.4
0.240
6.1
0.035
0.043
0.9
1.1
-
+
~ ~
（ ）
（ ）
0.256
（
6.5
）
（ ）
DB-S
（ ）
（ ）
（ ）
（ ）
0.0059
（ ）
（ ）
（ ）
0.098
（
2.50
）
（ ）
0.205
（
5.2
）
0.197
（
5.0
）
Dimiensions in inches and
（
milimeters
）
MAX 0.0078
（
0.2
）
