DB101
-
DB107
Features
· Glass Passivated Die Construction
· Low leakage
· Ideal for printed circuit board
· Surge overload rating-30A peak
· Designed for Surface Mount Application
· Plastic Material-UL Flammability 94V-O
Mechanical Data
· Case:Reliable low cost construction
utilizing molded plastic technique
· Terminals:Plated Leads Solderable per
MIL-STD-202,Method208
· Polarity:As Marked on Case
· Mounting Position:Any
· Marking:Type Number
Maximum Ratings and Electrical Characteristics @TA=25℃ unless otherwise specified
Single Phase,half wave,60Hz,resistive or inductive load.For capacitive load,derate current by 20%.
Parameter Symbol DB101 DB102 DB103 DB104 DB105 DB106 DB107 UNIT
Maximum repetitive peak reverse voltage
V
RRM
50 100 200 400 600 800 1000 V
Maximum RMS voltage V
RMS
35 70 140 280 420 560 700 V
Maximum DC blocking voltage
V
DC
50 100 200 400 600 800 1000 V
Maximum Average forward output rectified
current @TA=40℃
I(AV) 1
Peak forward surge current 8.3ms single
sine-wave superimposed on rated load(JEDEC
Method)
IF
SM
30 A
Maximum instantaneous forward voltage drop
per diode @1.0A
VF 1.1 V
Maximum DC reverse current at TA=25℃
rated DC blocking voltage per leg TA=125℃
IR
5.0
500
uA
Typical thermal resistance per leg (Note1)
RθJA 40
℃/W
RθJL 15
Operating junction temperature range TJ -55 to +150 ℃
storage temperature range Tstg -55 to +150 ℃
Note:
1.Mounted on glass epoxy PC board with 1.3mm² solder pad.
2.Mounted on aluminum substrate PC board with 1.3mm² solder pad.
3.Measured at 1.0MHz and applied reverse of 4.0V D.C.
A
BRIDGE RECTIFIERS
DB-1
http://www.trr-jx.com
version: 02
