項目 Item 製品規格 Specification
耐圧性 耐圧試験圧⼒4.3MPaで漏れなきこと。
Pressure resistance After pressurization (4.3MPa pressure test), to satisfy specification of leakage.
気密性 R134aにて、年間漏れ量2g以下のこと。
Leakage Using R134a,Annual leakage less than 2g.
静圧破壊強度 15.3MPa以上のこと。
Burst Pressure Strength More than 15.3MPa
繰返加圧性 0⇔4.3MPa×3cycle/min×50,000cycle 実施後、 耐圧性および気密性を満足すること。
Pressure Cycle また、チューブ積層方向の寸法変化は±2mm以下とする。
After examination enforcement (0⇔4.3MPa×3cycle/min×50,000cycle),
to satisfy specification of leakage and pressure resistance.
The lateral dimensional change should be less than ±2 mm.
繰返冷熱性 <100℃×1hr⇒冷却1.5hr⇒-20℃×1hr⇒加熱1hr>/cycle×10cycle実施後、
Heat Cycle 耐圧性および気密性を満足すること。
また、チューブ積層方向の寸法変化は±2mm以下とする。
After examination enforcement (<100℃×1hr⇒cooling1.5hr⇒-20℃×1hr
⇒heating1hr>/cycle×10cycle), to satisfy specification of leakage and
pressure resistance.
The lateral dimensional change should be less than ±2 mm.
耐食性 JISZ2371に準じるSST試験を720hr実施後、洩れに至る有害な孔食の発生なきこと。
Corrosion Resistance No harmful pitting corrosion lead to leakage after SST 720hr. (JISZ2371)
内部残留異物
3×10
-3
mg/cm2以下のこと。
Remaining 但し、コア内表⾯積0.7m2以下の⼩型モデルは絶対量10mg以下とする。
Foreign Substances Less than 3×10-3mg/cm2.
Small models should be less than 10 mg
強度
Strength
清浄性
Cleanliness
耐久性
Durability
3