An Asahi Kasei Group Company.

Document: PSH6623 Rev: 5

Standard specication

Measured gas Carbon dioxide (CO

)

Operating principle Non-dispersive infrared (NDIR)

Operating environment Indoor

Measurement range:

400 – 5000 ppm

Temperature 0 – 50 °C

Relative Humidity 0 – 100% RH

Accuracy (CO

) ±30 ppm ±3% of reading

Dimensions 148 x 58 x 29 mm

Life expectancy >15 years (battery 2 years)

Power supply 2 x A Li-SOCI2 batteries

(included)

Communication Bluetooth LE

Note 1: Except battery replacement, no maintenance required in normal indoor air as

ABC (Automatic Baseline Correction) is used

Note 2: After 3 ABC periods with default conguration

Key benets

• Maintenance free

• 3 sensors in one housing

• Battery-powered

• IoT connected using the market’s leading radio interfaces

• IAQ indication on display as well as intuitive LEDs

• Available as a white-label product

Senseair Aercast

Battery powered and wireless IAQ Monitor

Senseair Aercast is an advanced and versatile 3-in-1

IAQ monitor. It measures CO

concentration, temperature

and humidity in the ambient air. The measured parameters

are conveniently combined into one common indicator –

the Senseair Index – describing how your performance is

affected by the ambient air. Research shows that the air

around us signicantly affects our health and performance.

Aercast puts you in control of the surrounding environment

and secures your top performance.

Thanks to the ultra-low power sensor, the Senseair

Aercast is possible to run on batteries for at least 2

years, depending on the actual conguration.

The measured data is shown on a high resolution display

and the overall indoor air quality is intuitively indicated

by the stylish LED elements. The data is wirelessly

transmitted using an open protocol and can be viewed

using a laptop dashboard or a smart phone app.

Senseair Aercast is provided as a white-label product

that could be branded with your own logotype. The

product complies with ASHRAE standard 189.1

(±50 ppm @ 1000 ppm of measured CO

value).