CIS-N-LED (10-20 A)
www.phocos.com
Technical Drawing
Solar Charge Controller w/ Integrated LED Driver
The CIS-N-LED is a 3-in-1 solution that increases lifetime, reliability,
efficiency and cost effectiveness. It is the perfect charge controller
for solar lighting applications such as streetlights or bus shelters, and
its motion sensor interface capabilities regulate LED brightness to
conserve energy.
To further conserve energy and extend the system’s lifetime, the
CIS-N-LED has two low voltage disconnect levels. The levels can
be programmed using one of Phocos' handheld remote control
accessories; the CIS-CU or the MXI-IR and our free CISCOM PC
software.
• Combines 3 functions in one:
charge controller + flexible timer
+ LED driver
• Developed especially for rough
environments, solar LED lamps,
and solar LED streetlights
• Flexible dimming functions
• Input for motion detector (PIR)
• Small size: fits everywhere
• LiFePO4 available through
CISCOM software
• True color PWM dimming
• Fully protected by the
encapsulated case, which
increases lifetime and reliability
and reduces costs
• Auto-protection function: two
low-voltage disconnects extend
system operation time and
reliability
• Infrared-programmable load
timing feature + dimming is
ideal for lighting systems
• IP68 Ingress Protection
Technical Data
Product Features
* Without simultaneous LED output current at a maximum ambient temperature of 50 ° C.
Please note: The CIS-N-LED features an integrated over-temperature protection that will
reduce the average charge current in case of too high temperatures.
Type
CIS-N-LED-
1050
CIS-N-LED-
1400
CIS-N-LED-
2800
System Voltage 12 / 24 V auto recognition
Max. Charge Current 20 A (30 A, ≤ 50 °C*)
Float Charge 13.8 / 27.6 V (25 °C)
Main Charge 14.4 / 28.8 V (25 °C), 0.5 h daily
Boost Charge
14.4 / 28.8 V (25 °C), 2 h
activation: battery voltage < 12.3/24.6 V
Equalization Charge
14.8 / 29.6 V (25 °C), 2 h; activation: battery
voltage < 12.1/24.2 V (at east every 30 days)
Deep-Discharge Protection
11.00-12.02 / 22.00-24.04 V (by SOC)
11.0-11.9 / 22.0-23.8 V (by voltage)
Reconnect Level 12.8 / 25.6 V
Overvoltage Protection 15.5 / 31.0 V
Undervoltage Protection 10.5 / 21.0 V
Max. PV Panel Voltage 30 / 50 V
Temperature
Compensation
-25 mV/K (12 V);
-50 mV/K (24 V)
Idle Self-Consumption 5-8 mA
Grounding Common Negative
Ambient Temperature -40 to +60 °C
Max. Altitude 4,000 m above sea level
Battery Type
Lead acid (gel, AGM, ooded),
LiFePO4 adjustable
Wire Cross Section 2.5 mm
2
(AWG 13)
Dimensions (WxHxD) 92 x 99 x 22 mm / 3.6 x 4 x 1 in
Weight 0.25 kg / 0.55 lbs
Ingress Protection IP68 (1.5 m, 72 h)
Certicates CE compliant, RoHS compliant
Warranty 5 years
Type 1050 mA 1400 mA 2800 mA
Output Voltage
15-49 V for 12 V system (5-15 LEDs in series),
30-49 V for 24 V system (10-15 LEDs in series)
Nominal Output
Current Per String
1050 mA 1400 mA 2800 mA
Max. Load Power 45 W 60 W 60 W (12 V) / 120 W(24 V)
Dimming Level 0 – 100 % (1.7 % steps)
PIR-Input
4 – 30 V with respect to battery negative, >= 0.7
mA; limited protection up to 50 V
LED Driver Data
Optional Accessories
CIS-CU
• Infrared remote control
programming accessory
MXI-IR
• Infrared to USB programming
accessory and interface to
CISCOM software
Subject to change without notice Version: 2020-03-10
99 mm
92 mm
22 mm
Product Introduction