ECO-N-MPPT (15 A)
www.phocos.com
Technical Drawing
MPPT Solar Charge Controller
Technical DataProduct Introduction
ECO-N-MPPT is the intelligent, cost-effective choice for low-power
applications that require maximum charging efficiency. Phocos’
high-performance maximum power point tracking (MPPT)
algorithm ensures optimal charging current from your panel/array
in all conditions. This results in up to 30% higher power yield than
conventional PWM charge controllers. This added efficiency paired
with Phocos’ precision 4-stage, temperature-compensated (external
temperature sensor included) charge regime significantly extends
battery lifespan, reducing number of battery replacements over the
useable life of the system.
The encapsulated housing and corrosion-resistant wire terminals
protect the ECO-N-MPPT from the harshest environments. An
intuitive, 3-LED interface display basic system status data including:
charge on/off, low battery warning, high/low-voltage disconnect,
and load over current/short circuit.
Product Features
Works in 12 or 24 V battery systems (auto recognition)
Up to 98% power-conversion efficiency
Compact footprint fits in tight spaces
Rugged, potted design withstands vibration, dust,
insects and water ingress
Install requires only a flathead screwdriver
Built-in low-voltage disconnect feature
Four-stage charging ensures maximum battery lifespan
User-selectable battery type
Lithium battery compatible
Programmable night light, battery type, charging voltages and
discharge voltage limit (MXI accessory required)
Type ECO-N-MPPT-85/15
System Voltage 12 / 24 V auto recognition
Max. Charge/Load Current 15 A
Float Charge 13.8 / 27.6 V (25 °C)
Main Charge 14.4 / 28.8 V (25 °C), 0.5 h daily
Boost Charge
14.4 / 28.8 V (25 °C), 2 h;
activation: battery voltage <12.3 / 24.6 V
Equalization Charge
14.8 / 29.6 V (25 °C), 2 h;
activation: battery voltage <12.1 / 24.2 V
(at least every 30 days)
Deep-Discharge Protection
11.00-12.00 / 22.00-24.04 V (by SOC)
11.0-11.9 / 22.0-23.8 V (by voltage)
Reconnect Level 12.8 / 25.6 V
Overvoltage Protection 15.5 / 31.0 V
Undervoltage Protection 10.5 / 21.0 V
Max. PV Panel Voltage 50 / 85 V
Max. Usable PV Power 225 W / 450 W
Max. PV Array Power 250 Wp / 500 Wp
Temperature Compensation -25 mV/K (12V); -50 mV/K (24 V)
Idle Self-Consumption 10 mA / 8 mA
Grounding Common Negative
Ambient Temperature -40 to +60 °C
Max. Altitude 4,000 m above sea level
Battery Type
Lead acid (gel, AGM, ooded), Lithium
(selectable with MXI accessory)
Datalogger 2 years
Max. Wire Cross Section 16 mm² (AWG 6)
Dimensions (WxHxD) 147 x 90 x 31 mm / 5.8 x 3.5 x 1.2 in
Weight 1.10 kg / 2.43 lbs
Ingress Protection IP68 casing / IP21 terminals
Certicates CE compliant, RoHS compliant
Warranty 5 years
Subject to change without notice Version: 2020-03-09
147 mm
90 mm
31 mm
Optional Accessories
MXI and MXI-232
• Interface for ECO-N-MPPT controller
communication with computer via USB
or RS232 interface