Feature Benefit
Gigabit and 10 Gb Ethernet data transfer speed
• Allows for higher data quantities to transfer at quicker speeds covering a variety of 1 Gb
applications and emerging 10 Gb needs
Field repairable • Designed for easier and less costly on-site termination repair
Uses standard 22D crimp contacts (M39029) • Standard off-the-shelf contacts are readily available and requires no special tooling
Small form factor • Critical space savings for highly dense applications
Anti-decoupling/self-locking mechanism for
rugged environments
• Connector will not disconnect/uncouple in a high-vibration application
Carlisle Interconnect Technologies' (CarlisleIT) Octax
®
-Solo 10 Gbps Ethernet Connector is a single-port, standalone connector
designed for a wide variety of aerospace and military applications. The Octax connector:
» Uses innovative inserts that isolate each twisted pair and contact, virtually eliminating near-end crosstalk
» Features cable and twists that are maintained extremely close to the contacts, minimizing characteristic impedance mismatch
» Delivers 10x the transmission speed (10 Gbps signal) and 2x the density compared to Quadrax-type solutions
» Single-Port 10 Gbps Ethernet connector
(compatible with CarlisleIT Gigabit Series Ethernet Cables)
» Aerospace and military
» Avionics
» IFEC
» High definition video displays
» Data loading
» Any high-speed Ethernet application
» Learn more: www.carlisleit.com/product/octax-solo
Octax
®
-Solo plug and flange-mount
receptacle connectors
Octax
®
-Solo JNR Octax
®
-Solo IR
Connectors & Adapters
Octax
®
-Solo 10 Gbps Ethernet Interconnect System
ULTRA HIGH-SPEED INTERCONNECT SOLUTION
SUGGESTED APPLICATIONS PART NUMBERING
Part Number Description Finish
OCTAX-SOLO-FMR Flange mount receptacle
connector
Ni PTFE
OCTAX-SOLO-JNR Jam nut receptacle
connector
Ni PTFE
OCTAX-SOLO-IR Inline (flange-less)
receptacle connector
Ni PTFE
OCTAX-SOLO-P Plug connector Ni PTFE
OCTAX-SOLO-FM-PCB* Straight PCB flange mount
receptacle connector
Ni PTFE
OCTAX-SOLO-FMR-W Flange mount receptacle
connector
CADMIUM OD
OCTAX-SOLO-JNR-W Jam nut receptacle
connector
CADMIUM OD
OCTAX-SOLO-IR-W Inline (flange-less)
receptacle connector
CADMIUM OD
OCTAX-SOLO-P-W Plug connector CADMIUM OD
* Jam nut design also available
See CarlisleIT’s line of Connectors & Adapters at:
CarlisleIT.com/products/connectors-accessories/
+1 (800) 458.9960
Sales@CarlisleIT.com
SS-10034-080520© Carlisle Interconnect Technologies, 2020. All trademarks, service marks and trade names are property of their respective holding companies. All Rights Reserved.
Carlisle 1E027X-8 Octax Assembly Return Loss
Carlisle 1E027X-8 Octax Assembly NEXT
Carlisle 1E027X-8 Octax Assembly ELFEXT
Test Scope Per Specification Notes
Environmental
Operating
Temperature
-65 °C to 175 °C
Altitude Immersion EIA-364-03
70,000 ft.,
500 VRMS
Fungus MIL-STD-810 By Similarity
Contamination by
Fluids
MIL-STD-810 By Similarity
Sand and Dust MIL-STD-810 By Similarity
Corrosion
Resistance
EIA-364-26,
Condition A
100 hrs
Mechanical
Vibration -
Random
EIA-364-28, Condition V, Letter "J"
Durability MIL-DTL-38999
500 Mate/Unmate
Cycles
Coupling Torque
MIL-DTL-38999,
3.11 and 4.5.7
6"/lb Max.,
1"/lb Min.
Contact Retaining
Force
EIA-364-29,
Method B
6 lb Max.,
.012" Displacement
Electrical
Dielectric
Withstand Voltage
EIA-364-20 500 VRMS, 60 Hz
Shell to Shell
Conductivity
EIA-364-83 10 mV drop
Insulation
Resistance
EIA-364-21 500 VDC, 1000 MΩ
Data Rate 10 Gbps
OCTAX-SOLO-FM-PCB
» A: 0.70"
» B: 0.55"
» C: 0.49"
» 3 grams (ref)
OCTAX-SOLO-FMR
» A: 0.70"
» B: 0.55"
» C: 0.947"
» 4.5 grams (ref)
OCTAX-SOLO-P
» A: N/A
» B: 0.51" dia.
» C: 0.879"
» 5 grams (ref)
(dB)
MHz
0
0 100 200 300 400 500 600
10
20
30
40
50
60
(dB)
MHz
0
0 100 200 300 400 500 600
10
20
30
40
50
60
70
(dB)
MHz
0
0 100 200 300 400 500 600
10
20
30
40
50
60
70
Octax
®
-Solo 10 Gbps Ethernet Interconnect System
SPECIFICATIONS & PERFORMANCE
Connectors & Adapters