SSG5000X marker delay command

September 14, 2022

The SIGLENT SSG5000X and X-V RF signal sources have marker outputs on the rear panel that enable

users to have the instrument source signals (markers) at deﬁned points in their output waveform. These

markers can also be delayed in time from the set points using the marker delay function.

From the front panel, the marker delay is located under the ARB > MARKER UTILITIES menu, as shown

below:

For remote programming, the commands were added in ﬁrmware revision 1.1.1.2.8 (released 11.14.21),

but were not shown in the SSG5000X Programming Guide (Versions PG0805x_E01B and earlier, as of

09.14.2022).

To Set:

“:IQ:DUALarb:MARKer:DELAy <n>”, where <n> is the time delay and units. For example, to set the delay

to 100 us, send “:IQ:DUALarb:MARKer:DELAy 100us”

To Query:

“:IQ:DUALarb:MARKer:DELAy?”

North American Headquarters

SIGLENT Technologies America, Inc

6557 Cochran Rd Solon, Ohio 44139

Tel: 440-398-5800

Toll Free:877-515-5551

Fax: 440-399-1211

info@siglent.com

www.siglentamerica.com/

European Sales Oﬃces

SIGLENT TECHNOLOGIES EUROPE GmbH

Staetzlinger Str. 70

86165 Augsburg, Germany

Tel: +49(0)-821-666 0 111 0

Fax: +49(0)-821-666 0 111 22

info-eu@siglent.com

www.siglenteu.com

Asian Headquarters

SIGLENT TECHNOLOGIES CO., LTD.

Blog No.4 & No.5, Antongda Industrial Zone,

3rd Liuxian Road, Bao’an District,

Shenzhen, 518101, China.

Tel:+ 86 755 3661 5186

Fax:+ 86 755 3359 1582

sales@siglent.com