MBR10200CT
SCHOTTKY BARRIER RECTIFIER
Case: TO-220AB molded plastic body
Terminals: Leads solderable per MIL-STD-750,
Method 2026
Polarity: As marked
Mounting Position: Any
Weight:0.080 ounce, 2.24 grams
The plastic package carries Underwriters Laboratory
Flammability Classification 94V-0
Construction utilizes void-free
molded plastic technique
Low reverse leakage
High forward surge current capability
High temperature soldering guaranteed:
250 C,0.25”(6.35mm) from case for 10 seconds
FEATURES
MECHANICAL DATA
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 C ambient temperature unless otherwise specified.
Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%.
Dimensions in inches and (millimeters)
TO-220AB
0.160 (4.05)
0.140 (3.55)
0.105 (2.67)
0.095 (2.41)
0.205 (5.20)
0.195 (4.95)
0.037(0.94)
0.027(0.68)
0.105 (2.67)
0.095 (2.41)
0.635(16.13)
0.625(15.87)
0.113(2.87)
0.103(2.62)
0.154(3.91)
0.148(3.74)
0.415(10.54)
MAX
0.410(10.41)
0.390(9.91)
0.145(3.68)
0.135(3.43)
0.350(8.89)
0.330(8.38)
1.148(29.16)
1.118(28.40)
0.590(14.22)
0.530(13.46)
0.022(0.58)
0.014(0.35)
0.110(2.79)
0.100(2.54)
0.560(14.2)
0.530(13.4)
0.055(1.27)
0.045(1.14)
0.185(4.70)
0.175(4.44)
PIN 1
PIN 3
PIN 2
CASE
1 2 3
PIN
DIA
Note:1.Measured at 1MHz and applied reverse voltage of 4.0V D.C.
2.Thermal resistance from junction to case
200
140
200
VOLTS
VOLTS
VOLTS
UNITS
Amps
Amps
Volts
10.0
150.0
Operating junction temperature range
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current
(see fig.1)
Peak forward surge current
8.3ms single half sine-wave superimposed on
rated load (JEDEC Method)
Maximum instantaneous forward voltage at 5.0A
Maximum DC reverse current TA=25 C
at rated DC blocking voltage TA=100 C
Typical junction capacitance (NOTE 1)
0.05
2.0
450
pF
C
mA
Typical thermal resistance (NOTE 2)
C/W
Storage temperature range
C
-65 to +150
-65 to +150
20
0.9
550
MBR10200CT
SYMBOLS
VRRM
VRMS
VDC
I(AV)
IFSM
VF
IR
RqJC
CJ
TJ
TSTG
1
http://www.sps-elec.com
旭特安和美科技（上海）股份有限公司
Special Sun A.H.M Technology(Shanghai) CO.,LTD.
RATINGS AND CHARACTERISTIC CURVES MBR10200CT
10
8
6
4
2
0
0 25 50 75 100 125 150 175 200
150
125
100
75
50
25
NUMBER OF CYCLES AT 60 Hz
FIG. 2-MAXIMUM NON-REPETITIVE PEAK FORWARD
SURGE CURRENT
FIG. 1- FORWARD CURRENT DERATING CUR VE
AVERAGE FORWARD RECTIFIED CURRENT,
AMPERES
£PEAK FORWARD SURGE CURRENT,
AMPERES
Single Phase
Half Wave 60Hz
Resistive or
inductive Load
1 10 100
AMBIENT TEMPERATURE, C
8.3ms SINGLE HALF SINE-WAVE
(JEDEC Method)
0.2 0.4 0.6 0.8 1.0 1.1
FIG. 3-TYPICAL INSTANTANEOUS FOR WARD
CHARACTERISTICS
INSTANTANEOUS FORWARD
CURRENT,AMPERES
INSTANTANEOUS FOR WARD VOLEAGE,
VOLTS
0.01
0.1
1
50
10
0 20 40 60 80 100
100
10
1
0.1
0.01
0.001
TJ=25 C
TJ=100 C
PERCENT OF PEAK REVERSE VOLTAGE,%
FIG. 4-TYPICAL REVERSE CHARACTERISTICS
INSTANTANEOUS REVERSE CURRENT,
MILLIAMPERES
TJ=75 C
TJ=25 C
PULSE WIDTH=300
ms
1%DUTY CYCLE
2
http://www.sps-elec.com
旭特安和美科技（上海��股份有限公司
Special Sun A.H.M Technology(Shanghai) CO.,LTD.