RFID Accessories Readers | Page 1 of 2
RAC3 Adapter Cable GPIO/ETH
936B206/a/0918 | Subject to change.
KATHREIN Solutions GmbH, Kronstaudener Weg 1, 83071 Stephanskirchen, Germany
Phone +49 8036 90831-20 | Fax +49 8036 90831 69 | www.kathrein-solutions.com | iot-info@kathrein-solutions.com
These adapter cables are suitable for connecting the KATHREIN UHF
RFID RRU 4000 and ARU 3000 reader series to an infrastructure used
for the RRU4 and ARU4 reader families. The existing Ethernet cable for
the ARU4 and RRU4 reader will be connected to the Ethernet port of the
RRU4000 or ARU3000 reader. It is not possible to realise a PoE+ supply
using this existing cable.
The two GPIO sockets for the RRU4 and ARU4 reader will be connected to
the single GPIO socket of the RRU4000 and ARU3000 readers.
Usable with the Following Readers
Order No. 52010431 52010432
Type RAC3 Adapter Cable GPIO RAC3 Adapter Cable ETH
Length [m]
1
0.5
Connector 1 x M12 male connector, 12-pole, A-coded
1 x M12 female connector, 8-pole, A-coded
1 x M12 female connector, 8-pole, A-coded
1 x M12 female connector, 4-pole, D-coded
1 x M12 male connector, 8-pole, X-coded
Degree of protection IP65
Accessories, optional
▪
For more information about accessories, go to https://www.kathrein-solutions.com/products/hardware/accessories.
General Specifications
RRU 4000 Reader Series Order No. Type
52010287 + 52010295 RRU4400 Reader Unit
52010288 + 52010296 RRU4500 Reader Unit
52020289 + 52010297 RRU4560 Reader Unit
52020290 + 52010298 RRU4570 Reader Unit
ARU 3000 Reader Series Order No. Type
52010291 + 52010299 ARU3400 Reader Unit
52010292 + 52010300 ARU3500 Reader Unit
52020292 + 52010301 ARU3560 Reader Unit
52020294 + 52010302 ARU3570 Reader Unit
RFID Accessories Readers | Page 2 of 2
RAC3 Adapter Cable GPIO/ETH
936B206/a/0918 | Subject to change.
KATHREIN Solutions GmbH, Kronstaudener Weg 1, 83071 Stephanskirchen, Germany
Phone +49 8036 90831-20 | Fax +49 8036 90831 69 | www.kathrein-solutions.com | iot-info@kathrein-solutions.com
Drawings RAC3 Adapter Cable Ethernet
Schematic Diagram – M12 male connector, 8-pole, X-coded
Pin allocation
Schematic Diagram – M12 socket, 4-pole, D-coded
3
1
4
2
Pin M12, X-coded M12 D-coded Signal
Pair 1 1 1 TX+/POE1
2 3 TX–/POE1
Pair 2 3 2 RX+/POE2
4 4 RX–/POE2
Pair 3 5 n.c. POE1
6 n.c. POE1
Pair 4 7 n.c. POE2
8 n.c. POE2
Drawings RAC3 Adapter Cable GPIO
Schematic Diagram – M12 male connector, 12-pole, A-coded
1
4
2
3
6
5
7
8
10
9
11
12
Connection
Schematic Diagram – M12 socket, 8-pole, A-coded
12
3
4
5
6
7
8
M12, 12-pole, Connector 1 Description M12, 8-pole, Connector 2 M12, 8-pole, Connector 3
1 OUT_CMN 1 1
2 OUTPUT_1 7
3 INPUT_3 8
4 INPUT_CMN 3 3
5 INPUT_1 2
6 GND 4 4
7 VCC 5 5
8 OUTPUT_4 6
9 OUTPUT_3 7
10 OUTPUT_2 6
11 INPUT_2 8
12 INPUT_4 2