nRF5340 SoC Product Brief Version 3.0
For more information please visit: nordicse mi.com/nRF52840
Specications
Related Products
Protocol support Bluetooth 5.3/802.15.4/ANT/2.4 GHz
proprietary
Microprocessor 64 MHz 32-bit Arm Cortex-M4 with FPU
Memory 1 MB Flash + 256 KB RAM
On-air data rate Bluetooth LE: 2 Mbps/1 Mbps/500 kbps/125
kbps 802.15.4: 250 kbps
2.4 GHz proprietary: 2 Mbps/ 1 Mbps
TX power Programmable from +8 dBm to -20 dBm in
4 dB steps
Sensitivity Bluetooth LE: -103 dBm at 125 kbps
-95 dBm at 1 Mbps
802.15.4: -100 dBm at 250 kbps
2.4 GHz: -93 dBm at 1 Mbps
-89 dBm at 2 Mbps
Radio current
consumption
DC/DC at 3 V
16.40 mA at +8 dBm TX power,
6.40 mA at 0 dBm TX power,
6.26 mA in RX at 1 Mbps
Oscillators 64 MHz from 32 MHz external crystal or
internal 32 kHz from crystal, RC or synthe-
sized
System current
consumption
DC/DC at 3 V
0.4 µA in System OFF, no RAM retention
1.86 µA in System OFF, full RAM retention
0.97 µA in System ON, no RAM retention
2.35 µA in System ON, full RAM retention
3.16 µA in System ON, full RAM retention
and RTC
Hardware security 128-bit AES CCM, ECB, AAR
Security subsys-
tem
Arm TrustZone CryptoCell 310
Digital interfaces USB 2.0, 4 × SPI master/slave, 2 × TWI mas-
ter/slave, 2 × UART, 4 × PWM, QPSI,
I²S, PDM, QDEC
Analog interfaces 12-bit 200 ksps ADC, GP comparator,
LP comparator
Peripherals 5 × 32 bit timer/counter, 3 × 24 real-time
counter, 20 × PPI channels, 4 × GPIOTE,
temperature sensor, watchdog timer, RNG
NFC NFC-A tag
Voltage supply 1.7 to 5.5 V LDO or DC/DC
Package options 7 × 7 aQFN73 with 48 GPIOs
6 × 6 QFN48 with 30 GPIOs
3.5 × 3.6 WLCSP94 with 48 GPIOs
nRF52840 DK Development kit for nRF52811 and
nRF52840 SoCs
nRF Connect SDK Main software development kit for the nRF
52840 SoC and other nRF52 Series SoCs
Power Proler Kit II Hardware tool for current measurement and
power proling your applications
nRF21540 RF FEM Range extender front end for Bluetooth LE,
Thread and Zigbee applications
nPM1100 PMIC Higly ecient power management IC for low
power small form factor devices
Thread certied and 802.15.4 support
The nRF52840 is a Thread certied component and as such
is ideal for home networking products using the Thread
mesh stack. This means it is suitable for developing products
for the Matter connected home ecosystem. The radio
supports 802.15.4 PHY and MAC layers and makes it suitable
for additional stacks using 802.15.4 such as Zigbee.
Arm CryptoCell 310
The nRF52840 features an on-chip Arm CryptoCell 310
cryptographic hardware accelerator. CryptoCell oers a
wide range of ciphers and security features for building solid
security into applications from the ground up. Use of
CryptoCell also makes associated security operations run
faster and uses less processing time and power than
equivalent operation carried out in software by the CPU.
nRF Connect SDK
The nRF Connect SDK is the software development kit for
the nRF52 Series SoCs. It supports development of Bluetooth
Low Energy, Thread and Zigbee applications. It integrates
the Zephyr RTOS, protocol stacks, samples, hardware drivers
and much more.
nRF Connect SDK also oers integration of HomeKit
Accessory Development Kit for developing products using
HomeKit.
nRF52840 Development Kit (DK)
The nRF52840 DK is the development kit for the nRF52840
SoC. It is aordable, and has everything needed for
development on a single board. All features and GPIOs of
the nRF52840 SoC are made available to the developer, and
it comes with an onboard SEGGER J-Link debugger enabling
both programming and debugging of the nRF52840 SoC,
without additional hardware investments.
The nRF52840 SoC and the nRF52840 DK is available
through Nordic Semiconductors distribution network.
7x7 mm 6x6 mm
3.5x3.6 mm