Multi-Conductor CU 600 V PE/PVC Insulation PVC Jacket Control Cable

Color Method 1 Table 1

Control Cable 600 Volt Copper Conductors, Polyethylene and Polyvinyl Chloride (PE/PVC) Insulation Polyvinyl Chloride (PVC)

Jacket, Control Cable Conductor Identiﬁcation Method 1 Table 1. Silicone Free

Image not to scale. See Table 1 for dimensions.

CONSTRUCTION:

1. Conductor: 7 strands class B compressed bare copper per ASTM B3 and ASTM B8

2. Insulation: Polyethylene (PE) 20 Mils thick and Polyvinyl Chloride (PVC) 10 Mils thick for all cable sizes

3. Filler: Polypropylene ﬁller on cables with 5 or less conductors

4. Binder: Polyester ﬂat thread binder tape applied for cables with more than 5 conductors

5. Rip Chord: Rip chord for ease of jacket removal

6. Overall Jacket: Polyvinyl Chloride (PVC) Jacket

APPLICATIONS AND FEATURES:

Southwire’s 600 Volt control cables are suited for use in wet and dry areas, conduits, ducts, troughs, trays, direct burial,

aerial supported by a messenger, and where superior electrical properties are desired. These cables are capable of operating

continuously at the conductor temperature not in excess of 90°C for normal operation in wet and dry locations, 130°C for

emergency overload, and 250°C for short circuit conditions.

SPECIFICATIONS:

• ASTM B3 Standard Speciﬁcation for Soft or Annealed Copper Wire

• ASTM B8 Concentric-Lay-Stranded Copper Conductors

• CSA

CSA marking is available upon request

• ICEA S-58-679 Control Cable Conductor Identiﬁcation Method 1 Table 1

• ICEA S-73-532 Standard for Control, Thermocouple Extension and Instrumentation Cables

• ICEA S-95-658 (NEMA WC70) Power Cables Rated 2000 Volts or Less for the Distribution of Electrical Energy

• IEEE 1202 FT4 Vertical Tray Flame Test (70,000 Btu/hr) and ICEA T-29-520 - (210,000 Btu/hr)

• VW-1 (Vertical-Wire) Flame Test

SAMPLE PRINT LEGEND:

Non UL Listed

SOUTHWIRE XX AWG X/C PE/PVC CDRS 75C PVC JACKET SUNLIGHT RESISTANT DIRECT BURIAL 600V {MM/DD/YYYY}

{SEQUENTIAL FOOTAGE MARKS} SEQ FEET

Southwire Company, LLC | One Southwire Drive, Carrollton, GA 30119 | www.southwire.com

SPEC 85013

Table 1 – Physical and Electrical Data

Stock

Number

Cond.

Size

Cond.

Number

Diameter

Over

Cond.

Insul.

Thickness

Jacket

Thickness

Approx.

Copper

Weight

Approx.

Weight

Resistance

@ 90°C

Min

Bending

Radius

Allowable

Ampacity

At 60°C *

Allowable

Ampacity

75°C *

Allowable

Ampacity

90°C *

AWG No. inch mil mil inch

/1000ft

Ω /1000ft Ω /1000ft inch Amp Amp Amp

18 AWG

606790 18 12 0.070 30 45 0.511 154 90 6.54 8.34 2.1 6 6 6

14 AWG

TBA 14 2 0.070 30 45 0.349 26 68 2.630 3.288 1.4 15 15 15

TBA 14 3 0.070 30 45 0.370 38 87 2.630 3.288 1.5 15 15 15

620646 14 4 0.070 30 45 0.403 51 109 2.630 3.288 1.6 14 15 15

TBA 14 5 0.070 30 45 0.440 64 132 2.630 3.288 1.8 14 15 15

TBA 14 6 0.070 30 45 0.479 77 155 2.630 3.288 1.9 14 15 15

606776 14 7 0.070 30 45 0.479 90 171 2.630 3.288 1.9 12 15 15

TBA 14 8 0.070 30 45 0.519 102 195 2.630 3.288 2.1 12 15 15

TBA 14 9 0.070 30 60 0.588 115 236 2.630 3.288 2.4 12 15 15

TBA 14 10 0.070 30 60 0.638 128 266 2.630 3.288 2.6 9 11 12

606777 14 12 0.070 30 60 0.659 154 303 2.630 3.288 2.6 9 11 12

TBA 14 15 0.070 30 60 0.730 192 371 2.630 3.288 2.9 9 11 12

TBA 14 19 0.070 30 60 0.768 243 446 2.630 3.288 3.1 9 11 12

TBA 14 20 0.070 30 60 0.808 256 475 2.630 3.288 3.2 9 11 12

TBA 14 25 0.070 30 80 0.937 320 619 2.630 3.288 3.7 8 9 11

TBA 14 30 0.070 30 80 0.991 384 719 2.630 3.288 4.0 8 9 11

TBA 14 37 0.070 30 80 1.067 474 862 2.630 3.288 5.3 7 8 10

12 AWG

618721 12 2 0.087 30 45 0.384 41 90 1.660 2.075 1.5 20 20 20

TBA 12 3 0.087 30 45 0.408 61 118 1.660 2.075 1.6 20 20 20

616856 12 4 0.087 30 45 0.445 81 148 1.660 2.075 1.8 16 20 20

617416 12 5 0.087 30 60 0.537 102 188 1.660 2.075 2.0 16 20 20

619173 12 6 0.087 30 45 0.532 122 214 1.660 2.075 2.1 16 20 20

617421 12 7 0.087 30 60 0.582 143 247 1.660 2.075 2.3 14 17 20

577810# 12 7 0.087 45 60 0.668 143 272 1.660 2.075 2.7 14 17 20

TBA 12 8 0.087 30 60 0.607 163 288 1.660 2.075 2.4 14 17 20

619382 12 9 0.087 30 60 0.651 183 324 1.660 2.075 2.6 14 17 20

TBA 12 10 0.087 30 60 0.709 204 365 1.660 2.075 2.8 10 12 15

619993^ 12 12 0.087 30 60 0.752 244 396 1.660 2.075 2.9 10 12 15

617420 12 12 0.087 30 60 0.759 244 396 1.660 2.075 2.9 10 12 15

TBA 12 15 0.087 30 60 0.813 305 516 1.660 2.075 3.3 10 12 15

TBA 12 19 0.087 30 80 0.896 387 657 1.660 2.075 3.6 10 12 15

TBA 12 20 0.087 30 80 0.942 407 699 1.660 2.075 3.8 10 12 15

TBA 12 25 0.087 30 80 1.043 509 860 1.660 2.075 5.2 9 11 13

TBA 12 30 0.087 30 80 1.104 611 1005 1.660 2.075 5.5 9 11 13

TBA 12 37 0.087 30 80 1.191 753 1211 1.660 2.075 6.0 8 10 12

10 AWG

618719 10 2 0.111 30 45 0.431 65 124 1.040 1.300 1.7 30 30 30

Southwire Company, LLC | One Southwire Drive, Carrollton, GA 30119 | www.southwire.com

SPEC 85013