BlockMaster Electronics, Inc.
(800)595-8881 www.blockmaster.com
10
MSQ (MEQ) Series MSQ (MEQ) 90
o
Series
7.5 and 7.62mm
7.5 and 7.62mm
Electrical
Current: 24A @ 450V
Wire range: 12 to 30 A WG
Wire section(mm
2
): 0.05 to 4mm
2
Pin dimension: 1mm x 0.8mm
CR: <15mΩ
IR: >10
9
Ω (500V DC)
Operating temp: -40
o
C to +1 10
o
C
Stripping length: 6.5mm
T orque: 0.5 Nm
PCB holes: min 1.4mm
PCB thickness: max 2.4mm
Climactic category: 40/1 10/21 Acc. to IEC 68-1
Materials
Housing: Polyamide 6,6 (UL94V-0)
Clamp: Copper alloy , Ni plated
Terminal: Copper alloy , Tin plated
Screw: M3, copper alloy , Ni plated
Colors available: Green, black
Marking
Adhesive marking strips 7,5 and 7,62mm centers.
Numbered Order Number
1-10 ESA340001 10
1 1-20 ESA34001 120
21-30 ESA34002130
Ink marking by factory (specify in order number):
Factory ink is permanent and will not rub off. Ink
has fluorescent tint for greater visibility .
0=no printing
A=upside down printing (consecutive #’s R to L)
B=regular printing (consecutive #’s L to R)
Custom markings are welcome with minimum order .
Contact factory for information.
Dimensions
EuroPCB Terminal Blocks
n=number of poles
L=(n-1) x 7.5 (for 7.5mm spacing)
L=(n-1) x 7.62 (for 7.62mm spacing)
Features:
*MSQ is green color with clamp in the
open
position
*MEQ is black with clamp in the
closed
position
*Captive screws
*Elevator clamp system
*T esting holes/points
*2 and 3 positions single mold
*2 to 24 positions modular
*Housing is resistant to chlorinated solvents, with no
dioxin or detrimental to health halogens.
*Every position of this product is mechanically and
electrically tested during assembly to ensure a
100% defect free product.
*Minimum 5 microns of tin plating on terminal for
easy soldering.
Specifications:
MSQ(MEQ)Series
Ordering Information
24A 450V 24A 450V
V
D
E
IMQ
C
S
v
V
D
E
IMQ
C
S
v
L+7.5
0.5
1
7.5
3.75
(L+7.62)
(3.81)
(7.62)
19
3.5
0.8
10
(7.62)
L
7.5
PCB Layout
19
10
3.6
0.8
L+7.5
0.5
1
3.75
7.5
(L+7.62)
(3.81) (7.62)
Dimensions
n=number of poles
L=(n-1) x 7.5 (for 7.5mm spacing)
L=(n-1) x 7.62 (for 7.62mm spacing)
Ordering Information
(7.62)
L
7.5
PCB Layout
MSQ
MEQ
Marking
3=7,5mm
7=7,62mm
Spacing
(02 to 24)
Poles
0,A,B
0
MSQ
MEQ
Marking
3=7,5mm
7=7,62mm
Spacing
(02 to 24)
Poles
0,A,B
9