Features
© Danfoss | DCS (afl) | 2019.05
Data sheet
Duct Mounting Set for gas detectors GD
For gas detectors with plastic sensor head - basic and premium units
AI304330175443en-000101 | 1
The duct mounting set consists of a sampling
tube with hose and adapter for gas detectors
with plastic sensor head - basic and premium
units.
Features • Easy to use
• Perfect coverage of the sensor head
• Double pipe can be cut to length for
adaptation to the duct diameter
Data sheet | Duct Mounting Set for gas detectors GD
2 | AI304330175443en-000101 © Danfoss | DCS (afl) | 2019.05
Sampling set
Gas sampling Via sampling tube / connecting hose
Flow rate Min. 5000 m/h (3.1 mph), max. 20,000 m/h (12.4 mph)
Air duct diameter Min. 0.1 m (3.94 in.), max. 1.0 m (39.37 in.)
Length of sampling tube
250 mm (9.84 in.), adaptable to the duct diameter by cutting to length:
192 mm (7.56 in.), 133 mm (5.24 in.) or 77 mm (3.03 in.)*
Hose length 2 x 1000 mm (39.37 in.)
Assembly
- Arrow at the sampling set in flow direction
- Always install in the centre of the duct
- Keep a minimum distance of at least 1000 mm to duct bends etc.
Specifications
5 mm (0,19 in)
32 mm (1,25 in )
89 mm (3,5 in)
H L
FLOW
70 mm (2,75 in)
After cutting to
length, attach the
end cap here!
After cutting to
length, attach the
end cap here!
Saw o
only here!
Saw o
only here!
After cutting to
length, attach the
end cap here!
Saw o
only here!
End cap
22 mm (0,87 in)
70 mm (2,75 in)
5 mm (0,19 in)
32 mm (1,25 in )
89 mm (3,5 in)
H L
FLOW
70 mm (2,75 in)
After cutting to
length, attach the
end cap here!
After cutting to
length, attach the
end cap here!
Saw o
only here!
Saw o
only here!
After cutting to
length, attach the
end cap here!
Saw o
only here!
End cap
22 mm (0,87 in)
70 mm (2,75 in)