Data Sheet for Precision Potentiometer
MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn / Munich
Tel.: +49 89 46094-0 ▪ www.megatron.de ▪ info@megatron.de
Date: 04/19/2022
Page: 1 of 5
Conductive Plastic Potentiometer
Series MP20/21
Specications are subject to change without notice
The MP20/21 potentiometers in 22 mm housing are for applications
where precise long-lasting and compact sensors are important.
Long life and accuracy
With or without mechanical end stop (320° / 360°)
Compact sensor with low installation depth 12 mm
A potentiometer with many options
The conductive plastic potentiometer MP20/21 (MP21 with mech. end-
stop) is a multitalent which is adaptable for a wide range of applications.
Note: The versions MP21 with stop are also used as manual control
Electrical Data
MP20 MP21
Eective electrical angle of rotation 1.)
320° ±5°
Total resistance 1.) 0,5..100 kOhm
Resistance tolerance ±15% (±10%)
Independent linearity (best straight line) 1.) ±1% (±0,5%)
Theoretical resolution
Nearly innite
Backlash (Hysteresis) 1.) ≤ 0,5°
Max. / recommended wiper current 1.) 10 µA / 2 µA
Power rating @ 70°C (0W @ 105°C)
1 W
Insulation Voltage 1.) 500 VAC, 1min
Insulation Resistance 1.)
1000 MOhm @ 500 VDC
Mechanical Data, Environmental Condi-
tions, Miscellaneous
MP20 MP21
Mechanical angle of rotation 360° without stop 320° +10° with stop
Lifetime (90% el. e. angle half sine) 2.) 10 Mio. rotations
Max. operational speed 400 rev. / min.
Bearing Sleeve bearing
Operational torque @ ambient temperature 1.) 2.) 5 Nmm
End stop torque 1.) 2.) - 60 Ncm
Operating temperature range -55..+105°C
Storage temperature range
-55..+105°C
Protection grade (IEC 60529) IP40
Protection option D shaft sealing (IEC 60529)
IP65 optional
Vibration (IEC 68-2-6, Test Fc)
15g 10..2000Hz x 12h
Shock (IEC 68-2-27, Test Ea)
49g @ 11 ms x 18
Housing diameter
22 mm
Housing depth
12 mm
Shaft diameter
6,00 mm (optional 6,35 mm)
Shaft type
Solid shaft