Single unit
●
While attaining large flow rates by an effective area of 36mm
2
〔Cv:
2.0〕, the valve achieves excellent space saving with a compact width
of just 23.8mm [0.937in.].
●
Valve selection from either a
25
mm
2
〔Cv: 1.4〕or a
36
mm
2
〔Cv: 2.0〕
effective area with the same outer dimensions offers a choice of
valves and low air consumption.
●
2-position double solenoid valves can be switched to single solenoid
valves.
※
1
●
External pilot type can be changed to internal pilot type
※
2
(PB series
only).
●
A compact and
highly reliable sole-
noid valve is used
as a pilot valve.
Easy replacement
is possible by
opening the valve
body cover.
※1: Single solenoid valves cannot be switched to double solenoid valves.
※2: Internal pilot type cannot be switched to external pilot type.
●
Achieves power consumption of just
1W
(DC24V) while maintaining
a large flow rate.
●
DC 24V coil specification uses bridge diodes for the internal circuit,
enabling wiring connections without observing polarity like AC coils.
A type manifold
(side piping type)
Sub-base
Photo shows F type manifold.
Space Saving with Large Flow Rate
Low Power Consumption
High Performance and Flexible Adaptability
430 series/430M
□
A
240 series/240M
□
AW
PB series
/
PBM
□
P
（effective area of
25/36mm
2
〔Cv: 1.4/2.0〕）
118.6mm
63.6mm
87mm
（effective area of
40mm
2
〔Cv: 2.2〕）
（
effective area of
16mm
2
〔Cv: 0.89〕）
661
This highly reliable 5-port, 2- or 3-position
valve can serve as a key valve for mid-
sized actuators.
Solenoid Valves PA
Series
Solenoid Valves PA
Series
We have achieved the “High Flow Rate” and space
Operation” and “Environmental Resistance” needed in
We have achieved the “High Flow Rate” and space
Operation” and “Environmental Resistance” needed in
●
Environmental protection rating
IP65
equivalent (dust ingress and
water jet resistant) is available as an option.
●
Maximum
1MPa
{10.2kgf/cm
2
} [145psi.] pressure air.
●
Stainless steel screws are used for high resistance to corrosion.
Note
Standard screws are compatible with NCU (non-ion) specification.
Note: Nickel plated screws are used in a few sections, such as on the terminal block.
●
Non-neutral construction eliminates unstable operation upon valve
position switching.
●
Manual override is
located under a protec-
tive cover, preventing
the possibility of erro-
neous operation.
●
The PB series plug-in type offers a wide choice of wiring selections as
an option, e.g., D-sub connector, terminal box and serial transmission
types, which are compatible with the serial transmission systems of
various companies, to suit the customer’s applications.
●
Safe Block
When used in combination with a 3-
position exhaust center valve on the
same manifold, the safe block can
ensure cylinder intermediate stop and
hold its position for long periods
without being affected by air leaks
between the spool and valve body.
●
Individual air supply and exhaust
spacer
Completely blocks 1 valve on the
manifold from the other valves, and
then performs air supply and
exhaust separately for each valve.
Non-plug-in type
Plug-in type, D-sub connector
Serial transmission type
Photo shows plug-in with cable type manifold.
Compatible with a Wide Range of Application Environments
Improved Safety and Reliability
Wide Range of Wiring Types and Options
Safe block
Individual air supply
and exhaust spacer
662
SOLENOID VALVES PA, PB SERIES
Achieves new generation “easy operation”
and “high performance” in an integrated
valve with a manifold.
Solenoid Valves PB
Series
Solenoid Valves PB
Series
saving “Compact Body” size, as well as the “Ease of
mid sized valves.
saving “Compact Body” size, as well as the “Ease of
mid sized valves.