Nominal Working Min. Burst Min. Bend Weight Reel

Hose I.D. Hose O.D. Pressure Pressure Radius / 100 Ft. Lengths

PART No. (IN.) (IN.) (P.S.I.) (P.S.I.) (IN.) (LBS.) (FT.)

HR7-4ORA-REEL 1/4 0.496 2750 11,000 1.50 6 250

HR7-5ORA-REEL 5/16 0.580 2500 10,000 1.75 8 250

HR7-6ORA-REEL 3/8 0.650 2250 9,000 2.00 11 250

HR7-8ORA-REEL 1/2 0.834 2000 8,000 3.00 16 250

For medium pressure hydraulic service in the handling of most hydraulic

fluids, diesel fuels, water and lubricating oils. Not suitable for use with

phosphate esters. This hose combines the best features of conventional

rubber hose with the unique advantages of synthetic materials.

Recommended use: Hand held grease guns.

• CONSTRUCTION: High tensile strength fiber reinforcement

Braided Synthetic fiber.

• TUBE: Oil and Heat-Resistant Nylon Inner Tube.

• COVER: Resistant Polyurethane non-pin pricked cover

• TEMPERATURE: -40°F to +200°F, -40°C to +93°C

• PACKAGING: Reels

• COLOR: Orange, NON-CONDUCTIVE Marking

• FITTINGS: SCTP series

* S.A.E. WORKING PRESSURES SHOWN

S.A.E. 100R7

FEATURES: • Low Elongation • Best Value 100R7 Hose

TYPICAL APPLICATIONS: For use with General Hydraulics • Material

Handling • Forklift • High Pressure Gas Transfer • Chemical Transfer

• CONSTRUCTION: Braided Synthetic Fiber Reinforcement

• TUBE: Nylon-Lined Core Tube

• COVER: Perforated Polyurethane Cover

• COLOR: Orange, NON-CONDUCTIVE Marking

• TEMPERATURE: -40°F to +200°F, -40°C to +93°C

• FITTINGS: SCTP series

Nominal Min. Bend Working Min. Burst Approx. Reel

Hose I.D. Hose O.D. Radius Pressure Pressure Wgt./Ft. Length

PART No. (IN.) (IN.) (IN.) (P.S.I) (P.S.I.) (LBS.) (FT.)

HR7TW-6ORA-REEL 3/8 .650 2 2,250 9,000 .130 250

Meet or Exceeds SAE J517

Exceeds 100R7 Impulse

Requirements

Lightweight and Flexible

Meets or Exceeds S.A.E. J517

Specifications

SAE 100R7 (Non-Conductive) HYD. HOSE (HR7ORA)

TWIN-LINE (Non-Conductive) HYD. HOSE (HR7TWORA)