OPERATING and MAINTENANCE
INSTRUCTIONS
Southwire® Extreme Duty Tension
Monitor - 10K
(XDTM)
READ AND UNDERSTAND ALL OF THE
INSTRUCTIONS AND SAFETY INFORMATION IN
THIS MANUAL BEFORE OPERATING OR
SERVICING THIS TOOL
05 / 20 (XDTM )
2020
TENSION:
00,000Ibs PAUSED
PULL SPEED:
DISTANCE PULLED:
MAX TENSION:
ELAPSED TIME:
JOB #:
MAX TENSION ALARM:
DATE/TIME:
00,000fpm
00,000ft
00,000@02:03:13pm
01/27/20/02:04pm
00:00:00
10.000
000
1
TABLE OF CONTENTS
Important Safety Information...................................................2-5
Description of Operation and Features...................................5-6
Pre-Use Set Up and Test….……………..…………….....….…7-8
Performing a Cable Pull….…………....………………….....…8-11
Identification………………….……………………………...…..…12
Specifications..........................................……..........................12
Warranty..............................................................................13-14
2
SAFETY FIRST
These symbols are used to call attention to hazards or unsafe
practices related that could result in injury or property damage.
The three safety words defined below indicate the severity of the
hazard. The message after the signal word provides information
for preventing or avoiding the hazard.
DANGER - Immediate hazards that if not avoided WILL
result in severe injury or death
WARNING - Hazards that if not avoided COULD result in
severe injury or death
CAUTION - Hazards or unsafe practices that, if not
avoided MAY result in severe injury or death
SAFETY ALERT SYMBOLS
Safety is essential in the use and maintenance of Southwire
®
Contractor Equipment. This instruction manual and any markings
on the tool provide information for avoiding hazards and unsafe
practices related to the use of this tool. Observe all the safety
information provided.