Transistor
Standard
HSOP8
-
RS6G100BG
30pcs
1. CHARGED DEVICE MODEL (CDM) / デバイス帯電モデル静電破壊試験
Table1 Charged device model ESD test results for each testing standards
各規格におけるデバイス帯電モデル静電破壊試験結果
STANDARD
TEST TYPE CLASS
FI-CDM C3
FI-CDM
(Condition:A)
C3
2. HUMAN BODY MODEL (HBM) / 人体モデル静電破壊試験
Table3 Human body model ESD test results for each testing standards
各規格における人体モデル静電破壊試験結果
STANDARD
TEST TYPE CLASS
Human body model
(Contact mode)
1A
Human body model
(Contact mode)
1A
3. NOTICE / 注意事項
Type
Sample Size
Product
Grade
Package
JEDEC Code
JEDEC
JS-002-2018
JEITA
ED-4701/302A
JEDEC
JS-001-2017
JEITA
ED-4701/302A
This product is electrostatic sensitive product, which may be damaged due to electrostatic discharge.
Proper handling in the manufacturing process and storage conditions are required to prevent voltage
exceeding the product maximum rating to be applied to the products. Electro-static protection are
preferred; grounding human body and equipment, isolation from charged objects, ionizer, friction
prevention, temperature and humidity control, etc..
本製品は静電気に対して敏感な製品であり、静電気放電等により破壊することがあります。取り扱い時や工程での実装時、保管時
において静電気対策を実施のうえ、絶対最大定格以上の過電圧等が印加されないようにご使用ください。特に乾燥した環境では静
電気が発生しやすくなるため、十分な静電気対策を実施ください。（人体及び設備のアース、帯電物からの隔離、イオナイザの設置、
摩擦防止、温湿度管理、はんだごてのこて先のアース等）
www.rohm.com
© 2022 ROHM Co., Ltd. All rights reserved.
1/1
2022.05
Rev.001
R1107
A
www.rohm.com
©2015ROHMCo.,Ltd.Allrightsreserved.
Notice
ROHM Customer Support System
http://www.rohm.com/contact/
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
Notes
The information contained herein is subject to change without notice.
Before you use our Products, please contact our sales representative
and verify the latest specifica-
tions.
Although ROHM is continuously working to improve product reliability and quality, semicon-
ductors can break down and malfunction due to various factors.
Therefore, in order to prevent personal injury or fire arising from failure, please take safety
measures such as complying with the derating characteristics, implementing redundant and
fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no
responsibility for any damages arising out of the use of our Poducts beyond the rating specified by
R
OHM.
Examples of application circuits, circuit constants and any other information contained herein are
provided only to illustrate the standard usage and operations of the Products. The peripheral
conditions must be taken into account when designing circuits for mass production.
The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly,
any license to use or exercise intellectual property or other rights held by ROHM or any other
parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of
such technical information.
The Products are intended for use in general electronic equipment (i.e. AV/OA devices, communi-
cation, consumer systems, gaming/entertainment sets) as well as the applications indicated in
this document.
The Products specified in this document are not designed to be radiation tolerant.
For use of our Products in applications requiring a high degree of reliability (as exemplified
below), please contact and consult with a ROHM representative : transportation equipment (i.e.
cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety
equipment, medical systems, servers, solar cells, and power transmission systems.
Do not use our Products in applications requiring extremely high reliability, such as aerospace
equipment, nuclear power control systems, and submarine repeaters.
ROHM shall have no responsibility for any damages or injury arising from non-compliance with
the recommended usage conditions and specifications contained herein.
ROHM has used reasonable care to ensure the accuracy of the information contained in this
document. However, ROHM does not warrants that such information is error-free, and ROHM
shall have no responsibility for any damages arising from any inaccuracy or misprint of such
information.
Please use the Products in accordance with any applicable environmental laws and regulations,
such as the RoHS Directive. For more details, including RoHS compatibility, please contact a
ROHM sales office. ROHM shall have no responsibility for
any damages or losses resulting
non-compliance with any applicable laws or regulations.
When providing our Products and technologies contained in this document to other countries,
you must abide by the procedures and provisions stipulated in all applicable export laws and
regulations, including without limitation the US Export Administration Regulations and the Foreign
Exchange and Foreign Trade Act.
This document, in part or in whole, may not be reprinted or reproduced without prior consent of
ROHM.
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)
14)