565
SHOCK ABSORBER Series
Fixed Absorption Capacity Linear Orifice Type
KSHJ Series
Total of 12 sizes and 66 models from M4 to M27 size.
Offers wide range of speeds, with maximum impact speed of 0.8 m/s to 3 m/s
Note
.
Stroke
Single orifice type shock absorber
Multi orifice type shock absorber
Linear orifice type shock absorber
M
M
Stroke
Small
oil path
Large oil path
Impact value
What is the linear orifice type?
Use of a linear orifice mechanism, in which the orifice changes linearly, ensures smooth shock
absorption.
Achieves the performance of shock absorbers with next-size-up stroke lengths, to reduce vibrations on
mounting frames and equipment.
Reduces the shock value in impacts, to lower the noise during workpiece impacts.
Operation principle
The piston stroke linearly
squeezes the oil path, for
soft absorption of shocks.
Page 571
Note: The maximum impact speed varies by model.
See specification table on p.571.
●With side mounting bracket●With cap ●With stopper nut
566
KSHC Series (Clean Room Specification) Class 5 (Equivalent to FED-STD209E
Class 100) compatibility
Page 585
Fixed Absorption Capacity Linear Orifice Type
KSHA Series
Total of five sizes, from M6 to M14.
All sizes can be set with heavy load and light load
absorption capacities.
Total of eight sizes, from M6 to M25.
Uses a special particle pocket structure, to prevent flying dust out.
Page 579
●Insert mounting
type
●With cap
●
With stopper nut
●
With flange
mounting bracket
●
With side
mounting bracket
●With cap ●With stopper nut
SHOCK ABSORBERS