Radiation-resistant Optical Transceivers
Space
ABLE
10G SM Series, 10G SL Series, and 28G SL Series
2
Space
ABLE
Radiation-resistant,
low-SWaP,
multichannel optical
transceivers for space
applications.
Key advantages
Rugged: withstand radiation doses > 100 krad
(Si) and qualified per MIL-STD 883 shock and
vibration.
��� Expected life: up to 20 years.
Operating temperature: –40 ºC to 85 ºC
10G
28G
SM SL SL
Height (mm) < 5 (SMT) 5.5* 6*
Bandwidth
(Gbps/channel)
10.3125 28
Sensitivity
(dBm for BER 10
–12
)
–9 –9
–7.5
(typical)
Power consumption
(mW/channel)
85 115 160
*: with interposer
Configurations
10G SM Series
4TRX (40G, full duplex)
12TX or 12RX (120G, half duplex)
10G SL Series
4TRX (40G, full duplex)
12TX or 12RX (120G, half duplex)
28G SL Series
4TRX (100G, full duplex), in development
12TX or 12RX (300G, half duplex), in
development
Applications
High-throughput communication satellites
LEO satellite constellations
GEO satellites
Board-to-board and payload-to-payload
connections
High I/O density, high BW communication links
The
Space
ABLE 10G SM Series, 10G SL
Series, and 28G SL Series radiation-
resistant onboard embedded optical
transceiver modules offer radiation
hardness, robustness, longevity, and high
I/O density.
The
Space
ABLE
®
line of products with their intrinsic radiation
resistance, are well suited to provide optical interconnect within
space vehicles. These devices are extremely rugged and deliver
bandwidth in excess of 300 Gbps in a chip size part.
The low profile
Space
ABLE 10G SM Series module can be
mounted directly upon a high-speed printed circuit board via
surface mountable 1.27 mm pitch BGA or via a MEG-array
connector.
The
Space
ABLE 10G and 28G SL Series low profile screw-in
module mounts to the board via an LGA connector (interposer).
Radiation resistance
All
Space
ABLE radiation resistant transceivers are engineered to
withstand radiation doses > 100 krad (Si). Furthermore, all our
devices are tested following ECSS process and lot acceptance.
Component pre-screening can be done for every batch of
transceivers sold for this application.
These optical modules include equalizers and pre-emphasis to
compensate long traces; these features can be turned off for
short traces (less than 10 cm) to reduce power consumption.
Actual-size illustration
Actual size of
Space
ABLE 10G SM 4TRX, 12TX, and 12RX.
Actual size of
Space
ABLE 10G SL 4TRX, 12TX, and 12RX.
Actual size of
Space
ABLE 28G SL 4TRX, 12TX, and 12RX.