VR-5000 10-P-0311_E Jan/1/2015 (1/5)
Double-coated rubber adhesive tape
VR-5000
Outline
Nitto VR-5000 is a double-coated adhesive tape consisting of the special rubber adhesive.
This tape offers excellent adhesive strength for a wide variety of substrates, a nd superior resistance to
repulsion force for metals and plastic parts. This tape can be applicable to various rubbers and foams,
too.
Structure
* "Non-woven fabric" is classified under a law called Customs Act of Fixed Rate Chapter 48
"Paper and paperboard; articles of paper pulp, of paper or of paperboard".
Feature
●Offers excellent adhesion for various substrates by using the special rubber adhesive.
●Offers superior repulsion property.
●Ten restricted substances by RoHS are not contained.
●Superior converting and handling performance in a die cut process.
Application
●Bonding of metals plates, plastic plates, rubbers and foams.
●Bonding of parts in:
Printers, Copiers, Televisions, Other office equipment and Home appliances.
Sizes
Tape thickness(mm)
Width(mm)
Length(M)
0.14
5～1,200
50
For more information, please contact us.
VR-5000
【Tape thickness：0.14 mm/ not include the liner thickness】
Special rubber adhesive
non-woven fabric*
Special rubber adhesive
Release liner
VR-5000 10-P-0311_E Jan/1/2015 (2/5)
Properties
●180 degree peeling adhesion for each substrate
●180 degree peeling strength for each temperature
Substrate
VR-5000
Stainless steel plate
30
Aluminum plate
29
ABS plate
31
PCABS plate
31
Polystyrene plate
32
HIPS plate
32
Polycarbonate plate
32
Polypropylene plate
30
Polyacetal plate
32
Polyethylene plate
15
Polyurethane foam
9
EPT rubber
10
CR rubber
12
Temperature
VR-5000
0 degree C
25
23 degree C
30
40 degree C
29
60 degree C
23
(Unit：N/20mm)
Tape size ：20mm width
Lining material ：PET#25
Pressing condition ：1 pass back and forth with a 2-kg
roller at 23 degree C, 50% RH
Applying condition ：23 degree C/50%RH × 30min
Peeling speed ：300mm/min
Peeling angle ：180 degree
Measurement temp ：23 degree C, 50%RH
(Unit：N/20mm)
Substrate ：Stainless steel plate
Tape size ：20mm width
Lining material ：PET#25
Pressing condition ：1 pass back and forth with a 2-kg roller
at 23 degree C, 50%RH
Applying condition ：Each temperature for 30min
Peeling speed ：300mm/min
Peel angle ：180 degree
Measurement temp ：0,23,40,60 degree C
PET#25
Substrate
VR-5000