IARPB
®
Retention post structure with housing for
electrical stability in high vibration
environments
Simple design for easy inspection of solder
connections
Full-circled plating for stable solderability
Retention post structure with housing for electrical stability in high
vibration environments
Vibration resistant, one-piece, wire-to-board connector
Pin counts:
Range Up to 6
Available 2, 3, 4, 5, 6
*Please inquire for pin counts not listed or outside of the pin count range.
Pitch(mm) 2.5
Pin size(mm) Φ0.7
Height (mm) 3.30 (2,3,4,5P) 3.80 (6P)
Width formula(mm) Single row: 1.2+2.5*?pin
Operating temperature
-40 - 105ºC
Insulation Resistance
100,000Mohm min.
Vibration resistance
10G
Current rating 3A per pin
Voltage rating 250V
Withstand Voltage AC 1000V/minute
Plating Sn
Housing PBT GF15
Applicable cable
AWG#22
*Insulation Diameter
1.67mm max.
Evaluation Several OEM specs
Positioning boss fixes housing in place and
prevents stress to the terminal under vibration
on the x-y-z axis
Positioning boss on the housing enhances performance under vibration
2P
3P
4P
5P 6P
Contact your sales representative for more detailed information. [ i-pex.com ]
202111R0
Full-circled plating for stable solderability
Simple design for easy inspection of solder connections
A
A - A
Sn plating
Pre-plated terminal is bended for Sn plating covered circumference, allowing high solderability
A
Risk of terminal deformation decreases as terminals are visible while mounting.
Fillet is easier to check after soldering, which reduces the cost of inspection.
Solderable from the top or bottom of the PCB.
IARPB
®
Component Parts Detail
Contact your sales representative for more detailed information. [ i-pex.com ]
202111R0
IARPB
®
CONNECTOR ASS’Y :
Rev. 3