IECEx Certificate
of Conformity
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification System for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com
Certificate No.: IECEx SIR 09.0121X
Status: Current
Date of Issue: 2020-08-14
Applicant: European Safety Systems Limited
Impress House, Mansell Road
Acton, London W3 7QH
United Kingdom
Equipment: BExCP3A, BExCP3B, BExCP3C, BExCP3D, BExCP3E, GNExCP6A, GNExCP6B GNExCP6C, GNExCP6D and
GNExCP6E Manual Call Points
Optional accessory:
Type of Protection: Increased safety, flameproof, encapsulation and dust
Marking:
Page 1 of 4
Issue No: 6
Certificate history:
Issue 5 (2020-01-06)
Issue 4 (2017-11-17)
Issue 3 (2016-06-17)
Issue 2 (2012-02-24)
Issue 1 (2011-12-23)
Issue 0 (2009-12-11)
BExCP3A and GNExCP6A Call Points:
Ex db eb IIC T6 Gb Ta = (-40°C +70°C)
Ex tb III C T75°C Db Ta = (-40°C +70°C)
Refer to the Annexe for Additional Models
1.
2.
3.
Approved for issue on behalf of the IECEx
Certification Body:
Position:
Signature:
(for printed version)
Date:
This certificate and schedule may only be reproduced in full.
This certificate is not transferable and remains the property of the issuing body.
The Status and authenticity of this certificate may be verified by visiting www.iecex.com or use of this QR Code.
Certificate issued by:
SIRA Certification Service
CSA Group
Unit 6, Hawarden Industrial Park
Hawarden, Deeside, CH5 3US
United Kingdom
Neil Jones
Certification Manager
IECEx Certificate
of Conformity
Certificate No.: IECEx SIR 09.0121X
Date of issue: 2020-08-14
Page 2 of 4
Issue No: 6
Manufacturer: European Safety Systems Limited
Impress House
Mansell Road
Acton
London W3 7QH
United Kingdom
Additional
manufacturing
locations:
This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with
the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was
assessed and found to comply with the IECEx Quality system requirements.This certificate is granted subject to the conditions as set out in
IECEx Scheme Rules, IECEx 02 and Operational Documents as amended
STANDARDS :
The equipment and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found
to comply with the following standards
IEC 60079-0:2017
Edition:7.0
Explosive atmospheres - Part 0: Equipment - General requirements
IEC 60079-1:2014-06
Edition:7.0
Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
IEC 60079-18:2017
Edition:4.1
Explosive atmospheres - Part 18: Protection by encapsulation "m"
IEC 60079-31:2013
Edition:2
Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t"
IEC 60079-7:2017
Edition:5.1
Explosive atmospheres - Part 7: Equipment protection by increased safety "e"
This Certificate does not indicate compliance with safety and performance requirements
other than those expressly included in the Standards listed above.
TEST & ASSESSMENT REPORTS:
A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in:
Test Reports:
Quality Assessment Report:
GB/SIR/ExTR09.0195/00 GB/SIR/ExTR11.0326/00 GB/SIR/ExTR11.0326/01
GB/SIR/ExTR16.0151/00 GB/SIR/ExTR17.0236/00 GB/SIR/ExTR19.0331/00
GB/SIR/ExTR20.0143/00
GB/SIR/QAR06.0020/08