IECEx Certificate
of Conformity
Certificate No: IECEx KEM 10.0003 Issue No: 1
Date of Issue: 2015-04-24
Manufacturer: European Safety Systems Ltd.
Impress House, Mansell Road
London W3 7QH
United Kingdom
Additional Manufacturing
location(s):
European Safety Systems Ltd.
Impress House, Mansell Road
Acton, London W3 7QH
United Kingdom
This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the
IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and
found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx
Scheme Rules, IECEx 02 and Operational Documents as amended.
STANDARDS:
The electrical apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was
found to comply with the following standards:
IEC 60079-0 : 2004
Edition:4.0
Electrical apparatus for explosive gas atmospheres - Part 0: General requirements
IEC 60079-1 : 2007-04
Edition:6
Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
IEC 60079-7 : 2001
Edition:3
Electrical apparatus for explosive gas atmospheres - Part 7: Increased safety 'e'
IEC 61241-0 : 2004
Edition:1
Electrical apparatus for use in the presence of combustible dust - Part 0: General requirements
IEC 61241-1 : 2004
Edition:1
Electrical apparatus for use in the presence of combustible dust - Part 1: Protection by enclosures "tD"
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the
Standards listed above.
TEST & ASSESSMENT REPORTS:
A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in
Test Report:
NL/KEM/ExTR10.0006/00 NL/KEM/ExTR10.0006/01
Quality Assessment Report:
GB/SIR/QAR06.0020/01
Page 2 of