Page 1/2
www.nitto.com
Product:
Product group:
General description
Nitto single-coated tape R9406HS consists of a special repulpable micro-crepe paper coated with
a colorless water-soluble pressure sensitive acrylic adhesive.
This product is used as multipurpose tape.
Construction
Characteristics
Nitto repulpable single-coated tape R9406HS is used for its special elongation properties in both
directions. This results in a very high stretching and shear resistance.
The release coating allows an easy unwind and application.
Nitto repulpable single-coated tape R9406HS can be cut out and re-pulped without contamination.
R9406HS has a good adhesion strength on different kinds of paper.
For storage, the tape is hermetically sealed in plastic bags, to maintain constant moisture content.
R9406HS passes repulpability test by TAPPI Method UM-213-A.
Application
Nitto single-coated splicing tape R9406HS is engineered for reel edge protection, core start and
reel closing in paper mills.
This multi-purpose product is used when repulpability and stretching is required.
Features
- very high stretching properties
- very high shear strength
- good adhesion strength
- multi-purpose tape
- repulpable according to TAPPI
Method UM-213-A
- RoHS compliant (2011/65/EC,
2015/863)
- Colorless water-soluble acrylic adhesive
- Paper carrier
Edition: January 2019
R9406HS
Repulpable Single-Coated Tapes
Page 2/2
General conditions of use and precautions:
The properties of the product might be adversely
affected by various elements such as composition,
condition and surface of and impurities in or on the
substrate, temperature and humidity during storage
and the surrounding environment at and after
application and time of exterior use.
When the product is used in combination with
another material or process, the user shall assure
the compatibility of the product in such combination
and whether this combination results in the
expected performance. The same principle applies
in the event of product use in extreme conditions or
circumstances, whether at or after the moment of
application, including extended exposure to sunlight
or extreme temperatures and pressure.
Packaging, transport and storage:
During transport and storage the product should
always be protected against direct sunlight
and extremes in temperature and humidity and
contained in its original packaging. Once removed
from its packaging, it should be promptly applied
and remain shielded from direct sunlight and
extreme temperature as well as protected against
dust and other impurities.
Liability:
Except for its wilful misconduct, Nitto Belgium’s
liability shall be limited to a replacement, a
reimbursement or an additional delivery of the
product, and shall not exceed the purchase price
of the products. In no event shall Nitto be liable in
respect of any indirect or consequential damages,
including loss of prots.
The above limitations of liability shall equally apply
if Nitto Belgium has assisted in any manner with the
selection, treatment or application of the product.
Product information:
This datasheet provides a general description of
the product properties and application scope. Full
technical details in connection with this product are
presented in the customer product specication,
which is available upon request.
Please be advised that the information reected in
this datasheet is subject to change and the product
described herein may be modied or discontinued
without notice.
For your local Nitto sales ofce, please visit our web site:
www.nitto.com
Copyright © 2019 NITTO BELGIUM NV. All rights reserved.
Nitto Belgium NV has obtained following
certicates:
- ISO 9001
- ISO 14001
- IATF 16949
Please check our website for applicable scope
If you require additional information on technical properties and application as well as product
sampling or testing, please contact your local Nitto sales ofce.
Edition: January 2019
Code: DS/06.09/D2 R9406HS ENG
This datasheet replaces all previous versions
Technical Properties
General physical properties
Typical Value Test Method
Tape thickness 0.140 mm EN 1942
Adhesive type Colorless water-soluble acrylic
Carrier type Siliconised blue micro-crepe paper
Adhesion to test carton 700 cN/20mm EN 1939
Static shear 0 mm/3h Nitto Belgium Test Method
Transport and storage conditions Temperature 15 °C to 30 °C
Relative humidity 40 to 75% RH
Details from the test methods are described on the customer product specication.
CAUTION: The above are typical values and should not be used in writing specications.
Performance properties
Typical Value Test Method
Temperature resistance 180 °C 3 min. , 200 g/cm²
Repulpability Good
Nitto Belgium Test Method (ISO 5263)
Dynamic Shear 90 N/4cm² Tested after 15 min., 300mm/min.
Tensile strength machine direction 100 N/20mm EN 14410
Tensile strength cross direction 60 N/20mm EN 14410
Elongation machine direction 9 % EN 14410
Elongation cross direction 6 % EN 14410
Oozing & Bleeding (1.5T/7days) No Contamination 2x10 paper layers, RT/50% RH
Warranty:
The product is guaranteed to be free from defect in material and workmanship and will be suitable
for use for the period as indicated on the packaging, subject to the conditions set out in the
product specication.
Application guidelines:
- Keep the tape in its original individual packaging until use.
- For optimum results, an even rub down pressure must be applied to the taped area to create
the best possible adhesion between tape and the web surface.
- The tape should be applied to clean and dry surfaces.
- The best application conditions are obtained at a temperature between 15 °C and 40 °C.
Repulpable Single-Coated Tapes - R9406HS