Page 1/2

www.nitto.com

Product:

Product group:

General description

Nitto double-coated tape D1341 consists of a PET carrier coated with a modied acrylic pressure

sensitive adhesive. Mainly used for splicing of papers and plastic lms.

Construction

Characteristics

Nitto D1341 is a double-coated splicing tape with a high initial tack,

combined with a high shear strength.

Thanks to the strong plastic carrier, the tape can easily be removed eg. core start applications.

Application

Nitto D1341 is a general purpose splicing tape. The tape is recommended for core start

applications where the tape can be easily removed (recycling purpose).

Features

- high initial tack

- high shear resistance

- easy removability

- RoHS compliant (2002/95/CE)

- Colourless modied acrylic adhesive

- PET Carrier

- Colourless modied acrylic adhesive

- Paper release liner

Edition: September 2013

D1341

Double Coated Tapes

Page 2/2

General conditions of use and precautions:

The properties of the product might be adversely

affected by various elements such as composition,

condition and surface of and impurities in or on the

substrate, temperature and humidity during storage

and the surrounding environment at and after

application and time of exterior use.

When the product is used in combination with

another material or process, the user shall assure

the compatibility of the product in such combination

and whether this combination results in the

expected performance. The same principle applies

in the event of product use in extreme conditions or

circumstances, whether at or after the moment of

application, including extended exposure to sunlight

or extreme temperatures and pressure.

Packaging, transport and storage:

During transport and storage the product should

always be protected against direct sunlight

and extremes in temperature and humidity and

contained in its original packaging. Once removed

from its packaging, it should be promptly applied

and remain shielded from direct sunlight and

extreme temperature as well as protected against

dust and other impurities.

Liability:

Except for its wilful misconduct, Nitto Belgium’s

liability shall be limited to a replacement, a

reimbursement or an additional delivery of the

product, and shall not exceed the purchase price

of the products. In no event shall Nitto be liable in

respect of any indirect or consequential damages,

including loss of prots.

The above limitations of liability shall equally apply

if Nitto Belgium has assisted in any manner with the

selection, treatment or application of the product.

Product information:

This datasheet provides a general description of

the product properties and application scope. Full

technical details in connection with this product are

presented in the customer product specication,

which is available upon request.

Please be advised that the information reected in

this datasheet is subject to change and the product

described herein may be modied or discontinued

without notice.

For your local Nitto sales ofce, please visit our web site:

www.nitto.com

Nitto Belgium NV has obtained following

certicates:

- ISO 9001

- ISO 14001

- ISO/TS 16949

Please check our website for applicable scope

If you require additional information on technical properties and application as well as product

sampling or testing, please contact your local Nitto sales ofce.

Edition: September 2013

Code: DS/07.10/E3 D1341 ENG

This datasheet replaces all previous versions

Technical Properties

General physical properties

Typical Value Test Method

Adhesive type Colourless acrylic adhesive

Tape thickness* 0.090 mm EN 1942

Release liner type/colour Siliconised white paper (90 g/m²)

Carrier type PET (0.012 mm)

Release value 10 cN/50mm Nitto Europe Test Method

Adhesion to BA steel 800 cN/20mm EN 1939

Static shear 0.5 mm/3h EN 1943

Transport and storage conditions Temperature 15 °C to 30 °C

Relative humidity 40 to 75% RH

* Tape thickness = Total thickness without liner

Details from the test methods are described on the customer product specication.

Performance properties

High temperature resistance 150 °C 3 min., 200 g/cm²

Dynamic Shear 400 N/4cm² Tested after 15 min., 300mm/min.

Splicing tack Medium Nitto Europe Test Method

Probe tack 500 cN/20mm² ASTM D2979

Warranty

The product is guaranteed to be free from defect in material and workmanship at the time of

delivery and will be suitable for use for a period of 6 months thereafter, subject to the conditions

set out herein.

Application guidelines

- Keep the tape in its original packaging until use.

- For optimum results, an even rub down pressure must be applied to the taped area to create

the best possible adhesion between tape and the substrates.

- Remove the liner prior to usage.

- The tape should be applied to clean and dry surfaces.

- The best application conditions are obtained at a temperature between 15 °C and 40 °C.

Double Coated Tapes - D1341