1
End cap
© Murrplastik Systemtechnik GmbH • proID_66642~20160815~890283~suv_ek
Accessories
End cap
A
I
L
PRODUCT INFORMATION SPECIFICATIONS
The type EK end cap is made of specially
modified polyamide and mounted on the
ends of the cable protection conduits. The
end cap is designed as an edge protector
so that exiting cables cannot be damaged
and the visual effect of the installation is
improved.
Mod. polyamide PA 6
-40 – 115 °C transient / short term
150 °C
V2 self-extinguishing
Type Order No. Colour Suitable for
Murrflex
A
mm
I
mm
L
mm
Pack
qty.
EK-M12/P9 83723552 Black M10/P7 ; M12/P9 15.00 7.80 20.00 50
EK-M16/P11 83723554 Black M16/P11 17.80 10.30 20.00 50
EK-M20/P16 83723556 Black M20/P16(S) 23.20 14.30 21.00 50
EK-M25/P21 83723558 Black M25/P21(S) 30.50 20.80 22.00 25
EK-M32/P29 83723560 Black M32/P29(S) 36.50 26.80 22.00 25
EK-M40/P36 83723562 Black M40/P36(S) 44.50 33.80 25.00 25
EK-M50/P48 83723564 Black M50/P48(S) 56.50 45.80 25.00 10
EK-M12/P9 83723512 Grey M10/P7 ; M12/P9 15.00 7.80 20.00 50
EK-M16/P11 83723514 Grey M16/P11 17.80 10.30 20.00 50
EK-M20/P16 83723516 Grey M20/P16(S) 23.20 14.30 21.00 50
EK-M25/P21 83723518 Grey M25/P21(S) 30.50 20.80 22.00 25
EK-M32/P29 83723520 Grey M32/P29(S) 36.50 26.80 22.00 25
EK-M40/P36 83723522 Grey M40/P36(S) 44.50 33.80 25.00 25
EK-M50/P48 83723524 Grey M50/P48(S) 56.50 45.80 25.00 10
MATERIAL PROPERTIES
Mod. polyamide PA 6
THERMAL PROPERTIES
Temperature / temperature range
-40 – 115 °C transient / short term 150 °C
FIRE BEHAVIOUR
Fire classification
V2 self-extinguishing
2
End cap
© Murrplastik Systemtechnik GmbH • proID_66642~20160815~890283~suv_ek
Accessories
End cap
CONFORMITY
RoHS (EC Directive 202/95/EC)
All details given in our sales material prospectuses and catalogues as well as the information available online are based on our current knowledge of the products described.
The electronic data and files made available by Murrplastik, particularly CAD files are based on our current knowledge of the product described.
A legally binding assurance of certain properties or the suitability for a certain purpose can not be determined from this information.
All information with respect to the chemical and physical properties of Murrplastik products as well as application advice given verbally, in writing or by tests, is given to the best of our knowledge.
This does not free the purchaser of carrying out their own inspections and tests in order to determine the suitability of a product for a specific purpose.
Murrplastik accepts no responsibility for the available information being up-to-date, correct or complete. Neither do we accept responsibility for the quality of this information.
Murrplastik accepts no liability for damage caused as a result of using our products.
Murrplastik reserves the right to make technical changes and improvements through constant further development of products and services.
Our General Terms and Conditions apply.