30KPXXH Series 30KW Transient Voltage Suppressor
DESCRIPTION:
The 30KP series of high current uni/bi-directional transient
suppressors are designed for A.C. line protection and high
power DC bus clamping applications. These devices offer
uni/bi-directional port protection from 28 volts to 288 volts.
They provide a clamping voltage lower than the avalanche
voltage. Therefore, any voltage rise due to increased
current conduction is contained to a minimum, providing
the best possible protection level. They can also be
connected in series and/or parallel to create very high
capacity protection solutions.
FEATURES:
Low zener impedance.
Excellent clamping capability.
JEDEC R-6/P-600 Molded Plastic.
Repetition rate (duty cycle): 0.01%.
Color band denoted cathode except bidirectional.
High temperature soldering: 260℃/10s at terminals.
Glass passivated chip junction in R-6/P600 package.
30000W Peak Pulse power capability at 10×1000μs waveform.
Fast response time: typically less than 1.0ps from 0V to V
BR
min.
High reliability application and automotive grade (AEC-Q101
qualified).
ISO16750-2 P5A 12V system (90V/4Ω/200ms 10c )
ISO16750-2 P5A 24V system (151V/8Ω/200ms 10c)
ABSOLUTE MAXIMUM RATINGS (T
A
=25ºC, RH=45%-75%, unless otherwise noted)
Peak pulse power dissipation on 10/1000μs
waveform
Peak pulse current of on 10/1000μs
waveform
Steady state power dissipation at T
L
=75
℃
Operating junction and Storage temperature
range
Peak forward surge current, 8.3ms single
half sine-wave