P4KE6.8CA Thru P4KE550CA
400W Transient Voltage Suppressors
TVS Diodes - 400W > P4KE Series
Description
The P4KE series is designed specifically to protect sensitive electronic equipment from voltage transients
induced by lightning and other transient voltage events.
Features
• For surface mounted applications in order to optimize board space
• Reliable low cost construction utilizing molded plastic technique
• Plastic material has UL flammability classification 94V-O
• Typical IR less than 1uA above 12V
• Fast response time: typically less than 1.0ps from 0 Volts to VBR min
• Glass passivated junction
• Low inductance
•Agency recognition:
Package: DO-204AL / DO-41
Applications
• I/O interface �� AC/DC power supply
• Low frequency signal transmission line (RS232, RS485, etc.)
Electrical Characteristics
Peak Pulse Power Dissipation at TA=25℃ by 10x1000μs waveform
(Fig.1)(Note 1), (Note 2)
Power Dissipation on infinite heat sink at TA=50℃
Peak Forward Surge Current, 8.3ms Single Half Sine Wave (Note 3)
Operating Junction and Storage Temperature Range
Notes:
1. Non-repetitive current pulse, per Fig.3 and derated above TA=25℃ per Fig. 2.
2. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional device only.
3. VF < 3.5V for VBR ≤ 200V and VF< 6.5V for VBR ≥ 201V.
Specifications are subject to change without notice 1 Tel: +86-755-27465585
HUAAN LIMITED www.huaandz.com Email: sales@huaandz.com