SMALL AC GEAR MOTOR
齿���
SMALL AC GEAR MOTOR
P03
TYPE AND MOTOR MODEL
小型交流减速电机型号说明方法
减速电机型号说明
Description Of Motor Model
ZHN - 100 - 50 - SZ - B - G1 - LD - Q1
箱体结构基本代号 Basic structure; ZHN (卧式 Horizonal), ZVN (立式 Vertical)
齿轮箱的减速比 Gear ratio: 3, 5, 10...1800
电机的基本结构 Motor basic data:
S: 三相电机 3-Phase motor, 220-240/380-415V, 50/60Hz
C: 单相电机 1-Phase motor, 220V, 50/60Hz
E: 单相电机 1-Phase motor, 110V, 50/60Hz
DV: 单相双电压电机 Double voltage motor, 110V/220V, 50/60Hz
Z: 缩框型减速电机 Light type duty
(标准型省略 Standard type omit)
刹车器 Brake unit
B: DC断电刹车器 Brake unit (另配交变直快速整流器 With quick rectifier from AC to DC)
YB: 手持放刹车器 Manual brake unit
F1: 110V轴流风机, F2: 220V轴流风机, F3: 380V轴流风机 F1: 110V axial fan, F2: 220V axial fan, F3: 380V axial fan
出轴端看接线盒方位 (如图示) Terminal box direction from output shaft (As shown)
G1: 左方向 Left G2: 右方向 Right G3: 上方向 Top G4: 下方向 Down
出轴端看引出线方位 (如图示) Lead direction from output shaft (As shown)
T: 向上 Top D: 向下 Down F: 向前 Forward B: 向后 Back L: 向左 Left R: 向右 Right
G1:左方向Left G2:右方向Right G3:上方向Top G4:下方向Down
G1:左方向Left G2:右方向Right G3:上方向Top G4:下方向Down
ZH
ZH Type
ZV
ZV Type
LD LT RD RT TL TR DL DR
LF LB RF RB TF TB DF DB
输出功率 Output: 100W, 200W, 400W, 750W, 1100W, 1500W, 2200W, 3000W, 3700W
SMALL AC GEAR MOTOR
P04
TYPE AND MOTOR MODEL
小型交流减速电机型号说明方法
出厂标准安装形式:Standrad installaion method
本公司出厂所有减速器适用如图安装形式
All of out company’s reducer can be applied to the following kinds of installation method
图中Q1Q4Q7Q8中注油孔方向为标准型
In the diagram, Q1, Q4, Q7, Q8 are our standard types of oil hole direction
注油孔在特殊位置的,请特别告知,本公司将修改出气孔位置
Pls inform us if the location of oil hole is special, we will modify it
实际使用时,建议将注油孔中的堵油销拔出,以平衡减速箱内的压力
Pls pull out the pin of the oil plug to reduce the pressure in the gearbox during running
出气孔方向
Air hold direction
Q1
出气孔方向
Air hold direction
Q2
出气孔方向
Air hold direction
Q3
无出气孔
No oil filling hole
Q4
出气孔方向
Air hold direction
Q5
出气孔方向
Air hold direction
Q6
出气孔方向
Air hold direction
Q7
出气孔方向
Air hold direction
Q8
出气孔方向
Air hold direction
Q1
出气孔方向
Air hold direction
Q2
出气孔方向
Air hold direction
Q3
无出气孔
No oil filling hole
Q4
出气孔方向
Air hold direction
Q5
出气孔方向
Air hold direction
Q6
出气孔方向
Air hold direction
Q7
出气孔方向
Air hold direction
Q8
备注:
订购变频电机时,请说明变频范围,减速电机的使用环境工作方式等。
带刹车减速电机总长度需增加10mm
Note:
For motors supplied by transducer please tell us detailed working modes and working ambient.
The total length of brake motors will be 10mm longer than standard motors.
30°
30°
30°
30°